Fujitsu MHZ2080BJ, Product/Maintenance Manual

Page: 254 / 320

Interface
5.4.3 PIO data-out command protocol
• WRITE MULTI (EXT) (FUA EXT)
•
WRITE BUFFER
• SECURITY DISABLE PASSWORD
•
SECURITY SET PASSWORD
• SET MAX UNLOCK
2) If an error remaining in the device prevents command execution, the device
sends the RegDH FIS with 1 set in the I bit.
Execution of the following commands involves data transfers from the host system
to the device:
•
WRITE SECTOR (S) (EXT)
• WRITE VERIFY
•
SMART WRITE LOG SECTOR
• SECURITY ERASE UNIT
• SECURITY UNLOCK
•
SET MAX SET PASSWORD
•
DOWNLOAD MICROCODE
• WRITE LOG EXT
• DEVICE CONFIGRATION SET
Data of one or more sectors is transferred from the host to the device.
An outline of this protocol is as follows:
1) The device receives a PIO data-out command with the RegHD FIS.
3) When the device is ready to receive data, it sets 0 in the BSY bit and 1 in the
DRQ bit of the Status field of the PIO Setup FIS. At this time, the device sets
0 in the I bit of the Status field of the PIO Setup FIS for a data transfer to the
first sector, while it sets 1 in the I bit for a data transfer to any sector other
than the first sector. Then, it sends this FIS to the host. In the E_Status field,
the device sets 1 in the BSY bit and 0 in the DRQ bit.
5-180 C141-E280