manualshive.com logo in svg

Fujitsu fi-8150, Operator'S Manual

Share
Download
Fujitsu fi-8150 Operator'S Manual Download Page 319

Paper Protection Is Set Off Frequently

Check the following points

●

Do the documents meet the paper requirements? (page 319)

●

Is there any foreign matter in the ADF? (page 319)

●

Are the brake roller and pick roller installed correctly? (page 319)

●

Are the brake roller and pick roller clean? (page 319)

●

Are the brake roller and pick roller worn out? (page 319)

●

Is the sensitivity level for the paper protection function set to high? (page 320)

If the problem still persists, check each item in 

Before You Contact the Scanner Service Provider (page

330)

 first, then contact the distributor/dealer where you purchased this product. Refer to the contact

information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.

●

Do the documents meet the paper requirements?

Solution

Use documents that meet the requirements.
For details, refer to 

Documents for Scanning (page 117)

.

●

Is there any foreign matter in the ADF?

Solution

Clean the ADF.
Remove any foreign matter from the ADF.
For details, refer to 

Daily Care (page 214)

.

●

Are the brake roller and pick roller installed correctly?

Solution

Install the brake roller and pick roller correctly.
For details, refer to 

Replacing the Brake Roller (page 233)

 and 

Replacing the Pick Roller (page 238)

.

●

Are the brake roller and pick roller clean?

Solution

Clean the brake roller and pick roller.
For details, refer to 

Daily Care (page 214)

.

●

Are the brake roller and pick roller worn out?

Solution

Check the counters for the brake roller and pick roller.

Troubleshooting

319

Summary of Contents for fi-8150



















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands