manualshive.com logo in svg

Fujitsu fi-8150, Operator'S Manual

Share
Download
Fujitsu fi-8150 Operator'S Manual Download Page 209

*1:In this operation mode, up to four overlap patterns can be memorized at a time (when one sheet is

scanned), and up to 32 overlap patterns can be memorized in total.
When the 33rd overlap pattern is detected, the first pattern that was memorized is overwritten.
However, when turning the scanner off and on, the number of memorized overlap patterns depends on
the setting for [Remember overlap patterns at power-off] in the Software Operation Panel.
For details, refer to 

Setting to Ignore Certain Overlap Patterns [Intelligent Multifeed Function] (page

386)

.

*2:The memorized overlap patterns can be erased in [14: iMFF Setting] on the [Settings Menu] screen of the

operator panel or can be erased in the Software Operation Panel.

The LCD will display 

 or 

 when the memory is erased.

This allows you to erase overlap patterns that were not supposed to be memorized.
Be careful with this operation because all memorized overlap patterns will be erased.

*3:Only one overlap pattern can be memorized in this operation mode.

Various Ways to Scan

209

Summary of Contents for fi-8150



















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands