manualshive.com logo in svg

Fujitsu fi-8150, Operator'S Manual

Share
Download
Fujitsu fi-8150 Operator'S Manual Download Page 184

Scanning Documents such as Envelopes or Multi-Layered Transfer Paper

Pressing the [Manual Feed] button to switch the feed mode to Manual Feed Mode allows you to scan documents
such as envelopes and multi-layered transfer paper.

ATTENTION

For details about the paper weights of the documents that can be scanned, refer to 

Document Thickness (Paper

Weight) (page 118)

.

 

1

Load a document in the ADF paper chute (feeder).
To scan a multi-layered transfer paper, position the bound edge first when loading the paper.
For details, refer to 

How to Load a Document in the ADF Paper Chute (Feeder) (page 113)

.

2

Press the [Manual Feed] button to switch the feed mode to Manual Feed Mode.

●

For fi-8190/fi-8290/fi-8170/fi-8270

[Manual Feed (Multifeed Detection is disabled)] is displayed on the LCD.

Various Ways to Scan

184

Summary of Contents for fi-8150



















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands