Fujitsu fi-8150, Operator'S Manual

Page: 414 / 434

Scanner Central Admin Server
Set this item to operate the scanner with PaperStream NX Manager using Scanner Central Admin Server.
You can monitor scanners or perform a single operation on them at the same time with Scanner Central Admin
Server.
Click [Scanner Central Admin Server] under [Linking with Server] to display the window.
[Enable] check box
Specify whether to use Scanner Central Admin Server.
The check box is cleared for the factory default setting.
If you select the check box, also set the following items.
● Host Name/IP address
ATTENTION
An IPv4 address is supported.
Note that an IPv6 address is not supported.
● Port Number
The factory default setting is "20444".
[Check connection] button
Check if the scanner can be connected to Scanner Central Admin Server.
[Apply to the scanner] button
Applies the configured settings.
Network Settings (fi Series Network Settings) [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250]
414