manualshive.com logo in svg

Fujitsu fi-8150, Operator'S Manual

Share
Download
Fujitsu fi-8150 Operator'S Manual Download Page 428

Name

Part No.

Supported model

Description

Photo Carrier Sheets

PA03770-0015

All models

Photo Carrier Sheets: These are
sheets that are used to feed
documents without damaging
them.
The Photo Carrier Sheet enables
you to scan documents such as
photographs and clippings
without damaging them.
The Photo Carrier Sheet should
be replaced approximately
every 500 scans.
However, replace it if damage
or dirt is noticeable.

Booklet Carrier Sheet

PA03810-0020

All models

Booklet Carrier Sheet: This is a
sheet that is used to feed
documents without damaging
them.
The Booklet Carrier Sheet
enables you to scan booklets
such as passports with attached
photos without damaging
them.
The Booklet Carrier Sheet
should be replaced
approximately every 2,500
scans.
However, replace it if damage
or dirt is noticeable.

For details about purchasing the scanner options and more information, contact the distributor/dealer where
you purchased this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety Precautions supplied
with this product, and then make an inquiry.

Appendix

428

Summary of Contents for fi-8150



















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands