Fujitsu fi-8150, Operator'S Manual

Page: 52 / 434

Connecting the Scanner via a Wired LAN in Order to Operate It with a Computer
(When Assigning an IP Address Manually) [fi-8190/fi-8290/fi-8170/fi-8270/
fi-8150/fi-8250]
This section explains about the setup procedure for you to connect the scanner to a network device via a wired LAN
in order to operate the scanner with a computer and manually assign an IP address to the scanner.
For the procedure to unpack the scanner, refer to Getting Started.
ATTENTION
If an old version of the software is installed, uninstall it first.
For the procedure to uninstall the software, refer to
Uninstalling the Software (page 429) .
1
Turn on the computer and log onto Windows as a user with administrator privileges.
2
Insert the Setup DVD-ROM into the DVD drive.
The [fi Series Setup] window appears.
HINT
If the [fi Series Setup] window does not appear, double-click "Setup.exe" in the Setup DVD-ROM via [File
Explorer] or [Computer].
3
Click the scanner model name to be used (if the window for selecting a model name is displayed).
4
Select either [Installation (Recommended)] or [Installation (Custom)].
● For [Installation (Recommended)]
Select [Installation (Recommended)] to install all the software required to operate the scanner.
a
Click the [Installation (Recommended)] button.
b
Install the software by following the instructions displayed in the window.
The [How to Connect the Scanner] window appears when the installation of the software is
complete.
Scanner Setup
52