FujiFilm ED-580XT Operation Manual Download Page 77

Page: 77 / 136

897N200877B

4-25

Chapter 4

Prepara

tion and Inspectio

4.6.4 Attaching Suction Unit

WARNING

• Firmly connect the suction tube from the suction unit to the suction connector on the LG

connector. If the suction tube is not attached properly, body fluid may drip from the tube
and can pose an infection control risk.

CAUTION

• Firmly connect the suction tube from the suction unit to the suction connector on the LG

connector. If the suction tube is not attached properly, body fluid may drip from the tube
and come into contact with related equipment, causing equipment failure.

Suction Connector

Suction Tube

Suction Unit

(1)

Firmly connect the suction tube from the suction unit to the suction connector of the
endoscope.

Light Source

Processor

Water Tank

4.6 Connecting Endoscope to Light Source, Processor and Related Equipment

Suction Unit

ED580XT_E2-30_897N200877B.indb 25

2018/09/20 15:50:23

Summary of Contents for ED-580XT









































































































































Search results

Summary of Contents for ED-580XT

Reviews:

Related manuals for ED-580XT

Brands by name

Popular brands

FujiFilm ED-580XT, Operation Manual

Search results

Summary of Contents for ED-580XT

Reviews:

Related manuals for ED-580XT

Brands by name

Popular brands