FujiFilm ED-580XT, Operation Manual

Page: 72 / 136

897N200877B
4-20
Chapter 4 Preparation and Inspection
4.5 Preparing Related Equipment
Prepare related equipment such as the following as per instructions provided in each operation
manual.
• Light source
• Processor
• Monitor
• Water tank
• Suction unit
• Endotherapy device
• Mouthpiece
• Endoscopic CO
2
Regulator
• Electrosurgical unit
4.5.1 Inspecting Related Equipment
Inspect related equipment as per instructions provided in each operation manual.
Note Some pieces of related equipment are not reprocessed before shipping from FUJIFILM
or the manufacturer. Reprocess them for the first time prior to use as per instructions
provided in respective operation manuals.
4.5.2 Preparing System
CAUTION
• With regard to the amount of sterile water in the water tank, follow the instructions
provided in the operation manual of the water tank. If the amount of sterile water in the
water tank exceeds the limit, the air/water supply function may be disabled or it may cause
equipment failure due to contact with spilled water.
• Use the endoscopic CO
2
regulator described in this manual. If another insufflation device
is connected, the air/water supply function lessens and may result in improper cleaning of
the lens.
(1) Move the cart with the processor, light source and other related equipment to the place where
endoscope is to be used.
Note • Refer to the Operation Manual of the processor/light source to install related
equipment onto the cart.
• When multiple foot switches are used, check the position of the corresponding foot
switch in advance, so as not to use the wrong foot switch by mistake.
(2) After turning the main switch on the cart to OFF position, insert the AC plug of the cart into a
hospital grade receptacle.
ED580XT_E2-30_897N200877B.indb 20 2018/09/20 15:50:22