FujiFilm ED-580XT Operation Manual Download Page 39

Page: 39 / 136

897N200877B

2-7

Chapter 2

Product Overview

♦

Control Portion

The control portion is used for operating each function of the endoscope. Hold this portion
during a procedure.

No.

Name

Function

10 Up/Down Angulation

Lock

Maintains the up/down angle of the bending section.

Moving this lock in the direction of F (Free) unlocks the up/

down movement of the bending section, allowing external

force to angulate the bending section freely.

Moving this lock in the direction opposite to F locks the up/

down movement and maintains the up/down angle of the

bending section.

11 Up/Down Angulation

Knob

Angulates the bending section upward or downward.

Turning this knob in the direction of U angulates the bending

section upward.

Turning this knob in the direction of D angulates the bending

section downward.

12 Left/Right Angulation

Lock

Maintains the right/left angle of the bending section.

Moving this lock in the direction of F (Free) unlocks the left/

right movement of the bending section, allowing external

force to angulate the bending section freely.

Moving this lock in the direction opposite to F locks the

right/left movement and maintains the right/left angle of the

bending section.

13 Left/Right Angulation

Knob

Angulates the bending section to the right or left.

Turning this knob in the direction of L angulates the bending

section to the left.

Turning this knob in the direction of R angulates the bending

section to the right.

14 Forceps Elevator Lever

Raises or lowers the forceps elevator.

Turning this lever in the direction of U raises the forceps

elevator.

Turning this lever in the direction opposite to U lowers the

forceps elevator.

15 Forceps Valve

One of the accessories for the endoscope. This valve is

attached to the instrument channel inlet to prevent leak or

backflow of air and/or fluids. In addition, an endotherapy

device is inserted into or a syringe is attached to this valve.

16 Instrument Channel

Inlet

Each endotherapy device is inserted from this inlet. An

endotherapy device or fluid injected with a syringe passes

through the instrument channel and comes out of the

instrument channel outlet in the distal end of endoscope.

17 Air/Water Valve Cylinder The air/water valve is attached to this cylinder.

ED580XT_E2-30_897N200877B.indb 7

2018/09/20 15:50:18

Summary of Contents for ED-580XT









































































































































Search results

Summary of Contents for ED-580XT

Reviews:

Related manuals for ED-580XT

Brands by name

Popular brands

FujiFilm ED-580XT, Operation Manual

Search results

Summary of Contents for ED-580XT

Reviews:

Related manuals for ED-580XT

Brands by name

Popular brands