FujiFilm ED-580XT, Operation Manual

Page: 63 / 136

897N200877B
4-11
Chapter 4
Prepara
tion and Inspectio
n
4.3.5 Inspecting Forceps Elevator Mechanism
(1) (2)
(1) Lower the forceps elevator lever to raise the forceps elevator.
(2) Raise the forceps elevator lever to lower the forceps elevator.
4.3.6 Inspecting LG Connector
Ventilation Connector
S Connector
Suction Connector
Light Guide Prong
Water Supply Connector
Air Guide Port
Light Guide Cover Glass
CAUTION
• Make sure that no moisture or foreign matter (such as dust, gauze fibers, metallic
fragments) adheres to the LG connector before connecting it to the light source. If the LG
connector with moisture or foreign matter (such as dust, gauze fibers, metallic fragments)
is connected, it may cause malfunction or failure of the devices.
• Do not touch the light guide cover glass. A dirty light guide cover glass may result in the
reduction of light intensity.
(1)
Visually and manually inspect the LG connector for abnormalities such as excessive
scratching, dents,
deformation or loose parts.
(2) Before attaching the LG connector to the light source, make sure that no moisture or foreign
matter (such as dust, gauze fibers) adheres to the light guide cover glass, air guide port,
ventilation connector, water supply connector or suction connector of the LG connector. If any
foreign matter is found, wipe it off with soft, sterile gauze moistened with alcohol.
4.3 Inspecting Endoscope
Insertion Portion Distal End Bending Section LG Connector Control Portion Forceps Elevator
ED580XT_E2-30_897N200877B.indb 11 2018/09/20 15:50:21