FujiFilm ED-580XT Operation Manual Download Page 76

Page: 76 / 136

897N200877B

4-24

Chapter 4 Preparation and Inspection

4.6.3 Attaching Water Tank

CAUTION

• Attach the water tank to the specified position of the cart or light source. Otherwise, fluid

may leak from the connector of the water tank and it may come into contact with related
equipment, causing equipment failure.

(1)

(2)

(1)

Align the pin of the water supply connector of the endoscope to the groove in the connector of
the water tank.

(2)

Insert the connector of the water tank straight into the water supply connector and attach it
firmly by turning the connector clockwise until it stops.

(3)

Visually check that the water supply connector of the endoscope and the connector of the
water tank are connected properly.

ED580XT_E2-30_897N200877B.indb 24

2018/09/20 15:50:23

Summary of Contents for ED-580XT









































































































































Search results

Summary of Contents for ED-580XT

Reviews:

Related manuals for ED-580XT

Brands by name

Popular brands

FujiFilm ED-580XT, Operation Manual

Search results

Summary of Contents for ED-580XT

Reviews:

Related manuals for ED-580XT

Brands by name

Popular brands