FujiFilm ED-580XT, Operation Manual

Page: 28 / 136

897N200877B
1-16
Chapter 1 Precautions
1.13 Precautions for Equipment Used in Combination
Use this product in combination with related equipment described in this manual.
“Appendix - Related Equipment Used in Combination”
Using related equipment not described in this manual can result in not only abnormal
operations but also equipment damage and/or patient or end-user injury.
For details, see “Electromagnetic Compatibility (EMC) Information” in Appendix.
“Appendix - Electromagnetic Compatibility (EMC) Information”
WARNING
• Use this product only in combination with related equipment described in this manual.
Otherwise, it is unable to ensure its functionality, and may cause severe harm to patient or
end-users.
• Set the suction pressure between 40 and 53 kPa. If the suction pressure is too high,
patient debris or fluids may leak or splash from the forceps valve, posing infection control
risks to patient or operator.
• Wear protective clothing when detaching the distal end cap from the distal end of the
endoscope. Otherwise, it may pose an infection risk.
• Firmly connect the suction tube from the suction unit to the suction connector on the LG
connector. If the suction tube is not attached properly, body fluid may drip from the tube
and can pose an infection control risk.
CAUTION
• Turn off the light of the light source except during an inspection, procedure, etc., when
necessary. If the light of the light source is left on, the distal end of the endoscope and its
surroundings may become hot, causing burn injury to the patient or end-user.
• When turning off the processor, also turn off the light source. If the light source remains on
after turning off the processor, the ALC (automatic light control) does not function and the
maximum amount of light is emitted. As a result, the distal end of the endoscope and its
surroundings may become hot, causing burn injury to the patient or end-user.
ED580XT_E2-30_897N200877B.indb 16 2018/09/20 15:50:17