FujiFilm ClearView CS, Service Manual

Page: 245 / 1404

CR-IR 363
Service Manual
MT-88
MT-88
011-202-11E
06.29.2012 FM6046
4.27 Error Code Analysis Flow: Mechanism 27
10356, 10357, 10358, 12357
n
Analysis Flow
RU software is of version 1.4 or later?
Q1
Update the RU software to the version 1.4 or later.
{MC:15. _Updating Software Versions}
N
Y
Check the error log in the ERROR DB.
m
The indicated error is at the beginning of the error log?
{MT:1.4 _Troubleshooting from Error Log}
Q2
Check the error code table again for the error at the beginning, and troubleshoot.
{MT:2. _Error Code Table}
N
Y
Power supply error (12810-12875) occurs?
Q3
Check the error code table again and troubleshoot.
{MT:2. _Error Code Table}
Y
N
m Check the branch path changeover guide driving arm.
{MT:22.3 _Checking the Erasure Conveyer Unit-2}
m Perform preparation procedures in the order named.
1. Secure space for servicing the machine.
2. Remove the covers.
3. Turn OFF the high-voltage switch of the SCN17A/SCT17B board.
A
m
Check the voltage on the CPU91A and DRV17A boards.
{MT:8. _Procedures for Checking the Voltage}
CPU91A, DRV17A/B, and SNS17A/B boards tested in MUTL normal?
{MT:18. _Board Test in MUTL}
Q4
N
Y
Q10
Q5
Check the sensor (SE2).
{MT:10. _Procedures for Checking the Sensors}
Q5
Check the sensor (SB6).
{MT:10. _Procedures for Checking the Sensors}
Q6
Check the motor (ME1).
{MT:11. _Procedures for Checking the Motors}
Q7
Check the solenoid (SOLE1).
{MT:12. _Procedures for Checking the Actuators}
Q8
Error recurs?
Q9
N
Y
A
m Replace the boards in the order named.
1. SNS17A/B board
{MC:13.7 _SNS17B/SNS17C/SNS17E Board}
{MC:13.8 _SNS17A/SNS17D Board}
2. DRV17A/B board
{MC:13.5 _DRV17A Board}
{MC:13.6 _DRV17B Board}
3. CPU91A board
{MC:13.2 _CPU91A Board}
Reseat the error-causing board and check if the error occurs again.
Q10
N
Y
A
m
Replace the error-causing board.
{MC:13.2 _CPU91A Board}
{MC:13.5 _DRV17A Board}
{MC:13.6 _DRV17B Board}
{MC:13.7 _SNS17B/SNS17C/SNS17E Board}
{MC:13.8 _SNS17A/SNS17D Board}