FujiFilm ClearView CS, Service Manual

Page: 175 / 1404

Error
Code
Error Name Occurrence Condition
Analysis
Flow
CR-IR 363
Service Manual
MT-18
MT-18
011-202-04
11.15.2004 FM4425
10374 Side-positioning unit grip HP
detection error
During bootup/M-Utility, the grip release motor (MC2) is driven to perform grip home-positioning of the side-
positioning conveyor unit; however, the OPEN or CLOSE of the grip release HP sensor (SC2) is not detected. After
two retries are executed, this is not detected, so that the system goes down.
{MT:4.8}
10378 Post-reading conveyor unit grip
HP detection error
During bootup/M-Utility, the grip release motor (MD1) is driven to perform grip home-positioning of the post-reading
conveyor unit; however, the OPEN or CLOSE of the grip release HP sensor (SD1) is not detected. After two retries
are executed, this is not detected, so that the system goes down.
{MT:4.9}
10382 Erasure unit grip HP detection
error
During bootup/M-Utility, the grip release motor (ME3) is driven to perform grip home-positioning of the erasure
conveyor unit; however, the OPEN or CLOSE of the grip release HP sensor (SE5) is not detected. After two retries
are executed, this is not detected, so that the system goes down.
{MT:4.10}
10386
Side-positioning unit side-
positioning mechanism HP
detection error
During bootup/routine processing/M-Utility, the side-positioning motor (MC1) is driven to perform side-positioning
mechanism home-positioning of the side-positioning conveyor unit; however, the OPEN or CLOSE of the side-
positioning mechanism HP sensor (SC1) is not detected. After two retries are executed, this is not detected, so that
the system goes down.
{MT:4.11}
10390 Erasure unit side-positioning
mechanism HP detection error
During bootup/routine processing/M-Utility, the side-positioning motor (ME2) is driven to perform side-positioning
mechanism home-positioning of the erasure conveyor unit; however, the OPEN or CLOSE of the side-positioning
mechanism HP sensor (SE4) is not detected. After two retries are executed, this is not detected, so that the system
goes down.
{MT:4.33}
10394 Suction cup HP detection error
During bootup/routine processing/M-Utility, the suction cup drive motor (MA1/2/3/4) is driven to perform suction cup
home-positioning; however, the OPEN or CLOSE of .the suction cup HP sensor (SA4/10/16/22) is not detected.
After two retries are executed, this is not detected, so that the system goes down.
{MT:4.12}
10398 Cleaning guide HP detection error
During bootup/M-Utility, the cleaning guide drive motor (MC4) is driven to perform home-positioning of the cleaning
guide; however, the OPEN or CLOSE of the cleaning guide HP sensor (SC4) is not detected. After two retries are
executed, this is not detected, so that the system goes down.
{MT:4.13}