FujiFilm ClearView CS, Service Manual

Page: 184 / 1404

Error
Code
Error Name Occurrence Condition
Analysis
Flow
CR-IR 363
Service Manual
MT-27
MT-27
011-202-11E
06.29.2012 FM6046
11333 Feed IP conveyance error (2)
During routine processing/M-Utility, the IP transport motor (MB1, MB2, MC3) is driven to convey the IP from the
feed/load conveyor unit to the side-positioning conveyor unit; however, the side-positioning entrance IP sensor (SG1)
does not transition to CLOSE within the specified period of time.
{MT:4.23}
11334 Feed IP conveyance error (3)
During routine processing/M-Utility, the IP transport motor (MB1, MB2, MC3) is driven to convey the IP from the
feed/load conveyor unit to the side-positioning conveyor unit; however, the pre-BCR IP sensor (SB5) does not
transition to OPEN within the specified period of time.
{MT:4.23}
11335 Feed IP conveyance error (4)
During routine processing/M-Utility, the IP transport motor (MB1, MB2, MC3) is driven to convey the IP from the
feed/load conveyor unit to the side-positioning conveyor unit; however, the side-positioning IP sensor (SC3) does
not transition to CLOSE within the specified period of time.
{MT:4.23}
11336 Feed IP sensor failure (1)
(SB5 failure)
During routine processing/M-Utility, the IP transport motor (MB1, MB2, MC3) is driven to convey the IP from the
feed/load conveyor unit to the side-positioning conveyor unit; however, the side-positioning IP sensor (SC3) or
side-positioning entrance IP sensor (SG1) transitions to CLOSE before the pre-BCR IP sensor (SB5) transitions to
CLOSE.
{MT:4.23}
11337 Feed IP sensor failure (2)
(SG1 failure)
During routine processing/M-Utility, the IP transport motor (MB1, MB2, MC3) is driven to convey the IP from
the feed/load conveyor unit to the side-positioning conveyor unit; however, the side-positioning IP sensor (SC3)
transitions to CLOSE before the side-positioning entrance IP sensor (SG1) transitions to CLOSE.
{MT:4.23}
11338 Cassette type error
During routine processing/M-Utility, an out-of-spec cassette is loaded into the machine (CR-IR362) equipped with a
both-side cassette error detection option.
{MT:4.24}
11339 Cassette barcode reading error
<User operation>
A cassette that is not compatible with the machine is loaded.
<Occurrence condition>
During routine processing, the barcode of the cassette can be read, but the data is defective.
{MT:4.24}
11340 IP size detection error (1)
During routine processing/M-Utility, the IP transport motor (MB1, MB2), convergence path changeover guide drive
motor (MB3), and side-positioning motor (MC1) are driven to determine the IP size; when the IP passage time for
the pre-BCR IP sensor (SB5), the detection status of the "11x14 IP" determination sensor (SG2), and the sensor
status of the inch/metric sensor (SA6, SA12, SA18, SA24) are checked, the result does not indicate a sensor
combination that is used for IP size determination. Nonconformance of the IP size is detected.
{MT:4.25}
11341 IP size detection error (2)
During routine processing/M-Utility, the IP size detected by the machine is compared with the IP barcode
information; however, error is detected in the barcode information.
If the IP is conveyed with the inch/metric sensor (SA6/SA12/SA18/SA24) damaged, the IP is conveyed to the IP bar
code reader (BCR1) of the side positioning conveyer unit and thereafter ejected to the cassette.
{MT:4.40}
11343 IP barcode reading error
During routine processing, the barcode cannot be read by the barcode reader (BCRC1) of the side-positioning
conveyor unit. Though the retries (twice) for reading the barcode are executed, it also cannot read, so that a
barcode data message which is inputted manually by user is displayed.
{MT:4.28}
11345 IP type error
During routine processing/M-Utility, the barcode information of the IP and the IP type that is set in CONFIG are
compared; however, the barcode information of an IP type other than the CONFIG setting is detected.
-