FujiFilm ClearView CS, Service Manual

Page: 979 / 1404

CR-IR 363
Service Manual
MU-46
MU-46
011-202-08E
09.30.2009 FM5540
4.3.19 VERSION UP: ALL RUs
For the RU's registered in "LIST OF EXISTING RU", select the device type of the RU's
to perform collective version update.
u
NOTES
u
- Do not power OFF the CL/RU while version update is being performed. If the power
is turned OFF while version updating, the machine will no longer boot up.
- When version update is to be performed for several RU's, version update of the
RU software is sequentially performed for the RU's connected. It takes about four
minutes for one RU to be updated.
Do not power OFF the CL and RU until install has been completed for all the RU's.
After install has been completed, be sure to check the software version of the RU's
and verify that their version update has been done.
Example: When two RU's, ru2 and ru1, are registered in "LIST OF EXISTING RU" in
order named, version update is performed for ru2 and ru1 in this order.
n
Procedures for VERSION UP: ALL RUs
REFERENCE
When version update is to be performed for several RU's, version update is performed
for one RU after another in order the connected RU's are registered in "LIST OF
EXISTING RU".
1.
From "LIST OF EXISTING RU" of RU PC-TOOL, select a RU.
2.
Click on the [PING] button.
→
Referring to the DOS prompt window displayed, verify that the result is 100%
successful.
{MU:4.3.6 _PING}
3.
For all the RU's connected to the CL, repeat steps 1 and 2.
4.
Click on the [VERSION UP] button.
→
A dialog box appears to prompt you to insert the CD-ROM.