FujiFilm ClearView CS, Service Manual

Page: 387 / 1404

CR-IR 363
Service Manual
MT-230
MT-230
011-202-04
11.15.2004 FM4425
12.6 Checking the Actuator Resistance Values
With reference to the block diagram, measure the actuator resistance values based
on the pin numbers.
{MT:17.11 _Actuators (SOLA1 to SOLA4, PA1 to PA4, SVA1 to SVA4, CLA1 to
CLA4)}
{MT:17.12 _Actuator (SOLE1)}
n
List of Resistance Values of Actuators
l
Solenoid
I/O No. Load name
Reference resistance value
Pin numbers 1 and 3 Pin numbers 1 and 4
SOLA1 Cassette hold solenoid
(first shelf)
13.5-16.5 Ω 134-154 Ω
SOLA2 Cassette hold solenoid
(second shelf)
SOLA3 Cassette hold solenoid
(third shelf)
SOLA4 Cassette hold solenoid
(forth shelf)
SOLE1 Branch path changeover guide
drive
SOLB1 Reserved
l
Pump
I/O No. Load name
Reference resistance value
Pin numbers 1 and 3
PA1 IP suction pump (first shelf)
1
Ω
or less
PA2 IP suction pump (second shelf)
PA3 IP suction pump (third shelf)
PA4 IP suction pump (forth shelf)
l
Valve
I/O No. Load name
Reference resistance value
Pin numbers 1 and 2
SVA1 IP leak valve (first shelf)
65-95 Ω
SVA2 IP leak valve (second shelf)
SVA3 IP leak valve (third shelf)
SVA4 IP leak valve (forth shelf)
l
Clutch
I/O No. Load name
Reference resistance value
Pin numbers 1 and 2
CLA1
Cassette ejection clutch
(first shelf)
110-150 Ω
CLA2
Cassette ejection clutch
(second shelf)
CLA3
Cassette ejection clutch
(third shelf)
CLA4
Cassette ejection clutch
(forth shelf)