FujiFilm ClearView CS, Service Manual

Page: 279 / 1404

CR-IR 363
Service Manual
MT-122
MT-122
011-202-04
11.15.2004 FM4425
5.17 Error Code Analysis Flow: Scanner 17
11287, 12287
n
Analysis Flow
Check the error log in the ERROR DB. m
Errors 10230-10236 logged?
Q1
Check the error code table again and troubleshoot.
{MT:2. _Error Code Table}
Y
N
A
Check the voltage of the SCN17A/SCT17B board test pin (CN5).
{MT:8. _Procedures for Checking the Voltage}
Q2
CPU91A and SCN17A/SCT17B boards tested in MUTL normal?
{MT:18. _Board Test in MUTL}
Q3
N
Y
Q8
Perform the diagnostics.
{MU:5.3 [5-1] _Diagnostic}
Q4
Check the photomultipliers (PMT).
{MT:13. _Procedures for Checking the Scanner I/O}
Q5
Check the connector of the scanner board.
{MT:22.4 _Checking the Connector on the Scanner Board}
Q6
Q7
Error recurs?
Q7
N
Y
A
m
Disconnect and reconnect the connectors in the following sequence. If the error is
detected, replace the affected part.
1. SCN17A/SCT17B board
{MC:13.4 _Scanner Board}
2. CPU91A board
{MC:13.2 _CPU91A Board}
Reseat the error-causing board and check if the error occurs again.
Q8
N
Y
A
m
Replace the error-causing board.
{MC:13.4 _Scanner Board}
{MC:13.2 _CPU91A Board}