FujiFilm ClearView CS, Service Manual

Page: 433 / 1404

CR-IR 363
Service Manual
MT-276
MT-276
011-202-11E
06.29.2012 FM6046
18. Board Test in MUTL
18.1 Analysis Flow
START m
Power OFF.
m
Remove the upper right-hand side cover.
m
Turn
OFF
the high-voltage switch.
m Power ON.
A
Board tested normal?
{MT:18.2 _Board Test}
Q1
N
Y
Q2
Power OFF.
m
Turn
ON
the high-voltage switch.
Reinstall the upper right-hand side cover.
m
m Return to the error code analysis flow or check flow.
Connector connected on the error-causing board snugly installed?
Q2
Restore
N
Y
Reseat the error-causing board and check if the error occurs again.
Q3
N
Y
A
m
Replace the error-causing board.
{MC:13.2 _CPU91A Board}
{MC:13.3 _IMG17A/B Board}
{MC:13.4 _Scanner Board}
{MC:13.5 _DAV17A Board}
{MC:13.6 _DAV17B Board}
{MC:13.7 _SNS17B/SNS17C/SNS17E Board}
{MC:13.8 _SNS17A/SNS17D Board}