FujiFilm ClearView CS, Service Manual

Page: 198 / 1404

Error
Code
Error Name Occurrence Condition
Analysis
Flow
CR-IR 363
Service Manual
MT-41
MT-41
011-202-11E
06.29.2012 FM6046
12381 Post-reading conveyor unit grip
HP detection retry (4)
During routine processing/primary erasure/M-Utility, the grip release motor (MD1) is driven after IP reading;
however, the grip release HP sensor (SD1) does not transition to CLOSE, so that home-positioning is performed.
{MT:4.9}
12382 Erasure unit grip HP detection
retry (1)
During bootup/M-Utility, the grip release motor (ME3) is driven for one pulse to perform grip home-positioning of the
erasure conveyor unit; however, the grip release HP sensor (SE5) does not transition to CLOSE within the specified
period of time, thus resulting in a retry.
{MT:4.10}
12383 Erasure unit grip HP detection
retry (2)
During bootup/M-Utility, the grip release motor (ME3) is driven to perform grip home-positioning of the erasure
conveyor unit; however, the grip release HP sensor (SE5) does not transition to CLOSE within the specified period
of time, thus resulting in a retry.
{MT:4.10}
12384 Erasure unit grip HP detection
retry (3)
During bootup/M-Utility, the grip release motor (ME3) is driven to perform grip home-positioning of the erasure
conveyor unit; however, the grip release HP sensor (SE5) does not transition to OPEN within the specified period of
time, thus resulting in a retry.
{MT:4.10}
12385 Erasure unit grip HP detection
warning
During bootup/M-Utility, the grip release motor (ME3) is driven to convey the IP after IP erasure; however, the grip
release HP sensor (SE5) does not transition to CLOSE, so that home-positioning is performed.
{MT:4.10}
12386
Side-positioning unit side-
positioning mechanism HP
detection retry (1)
During bootup/routine processing/M-Utility, the side-positioning motor (MC1) is driven for one pulse to perform
home-positioning of the side-positioning mechanism (side-positioning conveyor unit); however, the side-positioning
mechanism HP sensor (SC1) does not transition to CLOSE within the specified period of time, thus resulting in a
retry.
{MT:4.11}
12387
Side-positioning unit side-
positioning mechanism HP
detection retry (2)
During bootup/routine processing/M-Utility, the side-positioning motor (MC1) is driven to perform home-positioning
of the side-positioning mechanism (side-positioning conveyor unit); however, the side-positioning mechanism HP
sensor (SC1) does not transition to CLOSE within the specified period of time, thus resulting in a retry. {MT:4.11}
12388
Side-positioning unit side-
positioning mechanism HP
detection retry (3)
During bootup/routine processing/M-Utility, the side-positioning motor (MC1) is driven to perform home-positioning
of the side-positioning mechanism (side-positioning conveyor unit); however, the side-positioning mechanism HP
sensor (SC1) does not transition to OPEN within the specified period of time, thus resulting in a retry.
{MT:4.11}
12389
Side-positioning unit side-
positioning mechanism HP
detection warning
During bootup/routine processing/M-Utility, when the home position is checked after the side-positioning operation
is completed at the side-positioning conveyor unit, the side-positioning mechanism HP sensor (SC1) does not
transition to CLOSE, so that home-positioning is performed.
{MT:4.11}