FujiFilm ClearView CS, Service Manual

Page: 204 / 1404

Error
Code
Error Name Occurrence Condition
Analysis
Flow
CR-IR 363
Service Manual
MT-47
MT-47
011-202-11E
06.29.2012 FM6046
12770 Erasure lamp cleaning end 1
During bootup, an error was detected in the communication between the CPU23B board and ERS board.
-
12771 INV board port 2 failure
It was detected during bootup or routine processing that the INV-board-mounted fuse for port 2 was blown.
-
12772 INV board port 3 failure
It was detected during bootup or routine processing that the INV-board-mounted fuse for port 3 was blown.
-
12773 INV board port 4 failure
It was detected during bootup or routine processing that the INV-board-mounted fuse for port 4 was blown.
-
12778 Wait for erasure due to the out-of-
temperature range
As the inside of the erasure unit is not within a specified temperature range, the erasure is awaited.
-
12779 Time-out in wait for erasure due
to the out-of-temperature range
During routine processing, a wait occurs as the erasure unit is out of the specified temperature range before erasing
the IP, and a time-out occurs.
-
12799 Self-reset procedure error
An interrupt is received such that the main CPU has accessed the self-reset register that is usually accessed during
shutdown processing, using improper procedure.
{MT:18.}
12800 Erasure unit safety thermostat
"TSWE1" operation
During bootup and routine processing, because the erasure unit lamp housing reaches an abnormally high
temperature, the safety thermostat TSWE1 is activated.
{MT:6.4}
12810 Power supply A021 error
During bootup and during routine processing, it is detected that the "A021" fuse (F1) on the SNS17B board is blown.
{MT:9.}
12811 Power supply A031 error
During bootup and during routine processing, it is detected that the "A031" fuse (F2) on the SNS17B board is blown.
{MT:9.}
12812 Power supply A041 error
During bootup and during routine processing, it is detected that the "A041" fuse (F3) on the SNS17B board is blown.
{MT:9.}
12813 Power supply A051 error
During bootup and during routine processing, it is detected that the "A051" fuse (F4) on the SNS17B board is blown.
{MT:9.}
12814 Power supply A061 error
During bootup and during routine processing, it is detected that the "A061" fuse (F5) on the SCN17A/SCT17B board
is blown.
{MT:9.}
12820 Power supply B error 1
During bootup and during routine processing, it is detected that the voltage of the DRV17A-r24V power
supply is not outputted.
{MT:9.}
12821 Power supply B011 error
During bootup and during routine processing, it is detected that the "B011" fuse (F1) on the DRV17A board is blown.
{MT:9.}