FujiFilm ClearView CS, Service Manual

Page: 1203 / 1404

CR-IR 363
Service Manual
PM-2
PM-2
011-202-08E
09.30.2009 FM5540
1.3 Preventive Maintenance Program List
u
INSTRUCTION
u
Safety provided by grounding is assured by properly establishing power cable and
additional protective ground wire connections and securing the parts with retaining
screws. To maintain safety, ensure that the parts and retaining screws removed for
servicing purposes are restored to states existing upon installation. After the parts and
retaining screws are restored to the above-mentioned states, follow the procedures set
forth in this service manual to verify that the retaining screws are securely tightened to
properly secure the parts.
Perform the specified preventive maintenance programs at the predefined intervals or
when the predefined process count is reached.
The preventive maintenance programs to be performed at various intervals are listed
below.
l
Preventive maintenance programs to be performed every year of
machine use or whenever a process count of about 60,000 is reached
( )
Reference
section
Maintenance program
Time
requirements
Periodic
replacement
parts
Remarks
2.1
Checking the Error Log 1
3 Checking the Image/
Conveyance
15
4 Pulling Out the Machine 1
5.2
Removing the Covers
(1 Year Intervals)
4
8
Checking the Feed/Load
Conveyor Unit
4
8.4.1
Cleaning the Brush Roller -
9 Checking the Side-
Positioning Conveyor Unit
2
9.3.1 Cleaning the Cleaning
Guide Assembly
(1 Year Intervals)
-
13.1
Removing the Lamp
Assembly
10
14
Checking Lamp Assembly -
14.1 Cleaning/Replacing the
Lamps
- #20001 or later
14.2 Cleaning the Filter - #20001 or later
14.4 Cleaning the Filter - #50001 or later
17 Cleaning/Reinstalling the
Covers and Louvers
2
18 Cleaning/Replacing the Air
Filter
3 #20001 or later
19 Securing the Machine 1
20
Checking the Image/
Conveyance
15
21
Checking the Laser
Performance/Sensitivity
22
Checking the Error Log 1