FujiFilm ClearView CS, Service Manual

Page: 188 / 1404

Error
Code
Error Name Occurrence Condition
Analysis
Flow
CR-IR 363
Service Manual
MT-31
MT-31
011-202-11E
06.29.2012 FM6046
11791 Erasure lamp cleaning end 1
The life end warning message appeared because a predetermined cumulative erasure lamp illumination time was
exceeded.
-
11905 IP suction pump life end
The message appeared and the error was logged because the life end of the IP suction pump was reached.
Replace the pump.
-
11908 [FRONT]S-value fluctuations (1)
The message appeared and the error was logged because S-value was fluctuated over 50% from initial value.
-
11909 [FRONT]S-value fluctuations (2)
The message appeared and the error was logged because S-value was fluctuated over 70% from initial value.
-
11910 [BACK]S-value fluctuations (1)
The message appeared and the error was logged because S-value was fluctuated over 50% from initial value.
-
11911 [BACK]S-value fluctuations (2)
The message appeared and the error was logged because S-value was fluctuated over 70% from initial value.
-
12030 Bitmap file load error
During bootup, loading of the bitmap file from the FLASH ROM to SD RAM fails.
{MT:18.}
12071 FTP server access error
During bootup and during routine processing, the FTP server cannot be accessed for communication from the RU to
the CL. Or, the FTP server may be accessed, but a connection cannot be established.
{MT:7.}
12072 History file restore
As the history file on the FTP server is destroyed, it is restored from the backup file.
-
12080 MUTL mode multiple access
warning
- "MUTL mode" functions are simultaneously activated for the RU.
- The function that is entered first is activated, but the function that is entered second is not activated, and error is
logged.
-
12101 Insufficient image data
Image data from the IMG17A/IMG17B board is insufficient. Although transfer was retried, a retry-over occurs. The
insufficient data is complemented with image data of a uniform density.
{MT:18.}
12102 Transfer retry due to insufficient
image data
As the image data from the IMG17A/IMG17B board is insufficient, transfer was retried.
-
12103 Undefined IMG result status
Undefined result status was returned from the IMG17A/IMG17B board.
-
12148 Image frame clock timeout
During routine processing, a timeout of the frame clock lock (information indicative of the leading edge of the image
data) sent from the SCT17B board is detected by the sub-CPU. (30 seconds)
{MT:6.1}