FujiFilm ClearView CS, Service Manual

Page: 212 / 1404

Error
Code
Error Name Occurrence Condition
Analysis
Flow
CR-IR 363
Service Manual
MT-55
MT-55
011-202-11E
06.29.2012 FM6046
13714 SNS17A/B board interrupt error
An error is detected for the SNS17A/B interrupt in MUTL: Board Check.
{MT:18.}
13715 INV17A/B register error
An error is detected for the register of the INV17A/B board in MUTL: Board Check.
{MT:18.}
13716 Erasure lamp test error
An error is detected for the erasure lamp test in MUTL: Board Check.
{MT:18.}
13717 Image processing CPU SDRAM
test error
An error is detected for the SDRAM test of the image processing CPU in MUTL: Board Check.
{MT:18.}
13718 Image processing FIFO test error
An error is detected for the FIFO test of the image processing CPU in MUTL: Board Check.
{MT:18.}
13719 Barcode communication error
An error is detected for the barcode communication test in MUTL: Board Check.
{MT:18.}
13820 Barcode data read test error
An error is detected for the barcode reading test in MUTL: Board Check.
{MT:18.}
13821 Power supply monitoring register
error
An error is detected for the power supply monitoring register check in MUTL: Board Check.
{MT:18.}
19066
Insufficient resource for timer
device
During bootup or during routine processing, the resource for the timer device becomes insufficient.
{MT:8.}
19067
Insufficient resource for sync
processing device
During bootup or during routine processing, the resource for the sync processing device becomes insufficient.
{MT:8.}
REFERENCE
The error code table is stored as an access file (.mdb) in the installation CD-ROM of the RU software. The following example shows a path on which the CR-IR 363 error code table is
stored when the installation CD-ROM of the RU software V2.4 is inserted into the D drive: D:\FujiFilm\FCR\CR-IR363\2.4\common\TOOL\EcodeMan.mdb.
Refer to the file in the installation CD-ROM when your information in the service manual is of an old version.