FujiFilm ClearView CS, Service Manual

Page: 179 / 1404

Error
Code
Error Name Occurrence Condition
Analysis
Flow
CR-IR 363
Service Manual
MT-22
MT-22
011-202-04
11.15.2004 FM4425
10435 Dust removal operation error (1)
During M-Utility, the dust removal motor (MZ3) is driven (clockwise) to perform dust removal operation; however, the
dust removal HP sensor (SZ4) does not transition to CLOSE within the specified period of time.
{MT:4.17}
10436 Dust removal operation error (2)
During M-Utility, the dust removal motor (MZ3) is driven (clockwise) to perform dust removal operation; however, the
dust removal HP sensor (SZ4) does not transition to OPEN within the specified period of time.
{MT:4.17}
10437 Dust removal operation error (3)
During M-Utility, the dust removal motor (MZ3) is driven (counterclockwise) to perform dust removal operation;
however, the dust removal HP sensor (SZ4) does not transition to CLOSE within the specified period of time.
{MT:4.17}
10438 Dust removal operation error (4)
During M-Utility, the dust removal motor (MZ3) is driven (counterclockwise) to perform dust removal operation;
however, the dust removal HP sensor (SZ4) does not transition to OPEN within the specified period of time.
{MT:4.17}
10439 Dust removal operation error (5)
During routine processing, the IP stopper drive motor (MZ4) is driven (clockwise) to perform the system shutdown
processing; however, the dust removal HP sensor (SZ4) does not transition to CLOSE within the specified period of
time.
{MT:4.42}
10440 Initialization convergence path IP
conveyance error (1)
During bootup, the IP transport motor (MB1, MB2, MC3) is driven to perform the remaining IP search processing;
however, the side-positioning entrance IP sensor (SG1) and pre-convergence IP sensor (SB6) do not transition to
OPEN within the specified period of time.
{MT:4.18}
10441 Initialization convergence path IP
conveyance error (2)
During bootup, the IP transport motor (MB1, MB2, ME1) is driven to perform the remaining IP search processing;
however, the side-positioning entrance IP sensor (SG1) does not transition to CLOSE within the specified period of
time.
Alternatively, the pre-BCR IP sensor (SB5) and pre-convergence IP sensor (SB6) do not transition to OPEN within
the specified period of time.
{MT:4.18}
10442 Initialization convergence path IP
conveyance error (3)
During bootup, the IP transport motor (MB1, MB2, MC3) is driven to perform the remaining IP search processing;
however, the side-positioning entrance IP sensor (SG1) and pre-BCR IP sensor (SB5) do not transition to OPEN
within the specified period of time.
Alternatively, the pre-convergence IP sensor (SB6) does not transition to CLOSE within the specified period of time.
{MT:4.18}