FujiFilm ClearView CS, Service Manual

Page: 967 / 1404

CR-IR 363
Service Manual
MU-34
MU-34
011-202-08E
09.30.2009 FM5540
4.3.12 EDIT CONFIGURATION
Used to edit the configuration information for the RU.
However, the configuration information (such as IP address of the RU) that is set in
Machine Maintenance cannot be set with EDIT CONFIGURATION.
Some of the RU configuration information is written into the FTP server, as well as into
the flash ROM of the RU.
n
EDIT CONFIGURATION Screen
u
NOTE
u
While the flash ROM of the RU is being updated, the panel of the RU lights up. During
that time, do not power OFF the RU.
If it is powered OFF, the contents of the flash ROM will be corrupted, so that the RU
will no longer boot up.
n
Function
l
Identification code of the RU
When multiple units of the RU are used, an identification code (one alphanumeric
digit) is set to allow the user to confirm, on the film, the RU that has performed image
reading.
l
Erasure mode
An erasure mode that is selectable by the erasure mode SW of the RU is set.
Example) When “ERASE1, ERASE2” is set:
By selecting the erasure mode SW, either secondary erasure or primary
erasure may be selected.
l
Erasure mode unsetting time
Set the time, in seconds, from when the erasure mode setting is changed to when it
reverts back to the "reading" mode.
When "0" is set, it remains changed.
l
Alarm setting for cassette setting
A setting is made to determine whether or not to sound an alarm when a cassette is
set.
- “ON” (default): An alarm is sounded.
- “OFF”: An alarm is not sounded.
l
Alarm setting for overexposed IP
- LOG&MESSAGE: Written into the log file with an error message displayed.
- LOG ONLY: Only written into the log file.
- NONE: Nothing is done.
l
Barcode reader setting (CR-IR 362 only)
It is set to determine whether the both-side cassette identification barcode reader is
used or not.
- "YES": The barcode reader is used.
- "NO" (default): The barcode reader is not used.