Fuji Xerox DocuPrint CM225FW, User Manual

Page: 93 / 344

Printing Basics 93
 Automatic Document Feeder (ADF) Guidelines
The ADF accommodates the following original sizes:
• Width: 148 – 215.9 mm (5.83 – 8.50 inches)
• Length: 210 – 355.6 mm (8.27 – 14.00 inches)
The weight range includes 60 – 105 gsm.
Follow these guidelines when loading original documents into the ADF:
• Load documents face up so that the top of the document enters the printer first.
• Place only loose sheets of paper in the ADF.
• Adjust the document guides so that they fit against the documents.
• Insert paper in the document feeder tray only when the ink on the paper is completely dry.
• Do not load documents above the MAX fill line. You can load up to 15 sheets of 64 gsm documents.
NOTE:
• You cannot load the following documents in the ADF. Be sure to place them on the document glass.
 Print Media That Can Damage Your Printer
Your printer is designed to use a variety of media types for print jobs. However, some media can cause poor output
quality, increased paper jams, or damage to your printer.
Unacceptable media includes:
• Rough or porous media
• Plastic media
• Paper that has been folded or wrinkled
• Paper with staples
• Envelopes with windows or metal clasps
• Padded envelopes
• Non-laser glossy or coated paper
• Perforated media
Curled originals Pre-punched paper
Lightweight originals Folded, creased or torn originals
Cut and paste originals Carbon paper
WARNING:
• Do not use conductive paper such as origami paper, carbonic paper or conductively-coated paper. When paper jam
occurs, it may cause short-circuit and eventually a fire accident.