Fuji Xerox DocuPrint CM225FW, User Manual

Page: 202 / 344

202 Faxing
• Prefix Dial
NOTE:
•
Prefix Dial
only supports the environment where you send a fax to the external line number. To use
Prefix Dial
, you
must do the following from the operator panel.
1
Press the ( System ) button.
2
Select the
Tools
tab, and then select
Admin Settings
.
3
Select
Fax Settings
.
4
Select
Fax Line Settings
.
5
Select
Line Type
.
6
Select
PBX
.
7
Access the
Fax Settings
menu by following steps from 1 to 3 .
8
Select
Transmission Defaults
.
9
Select
Prefix Dial
.
10
Select
On
, and then select
OK
.
11
Enter an up-to-five-digit prefix number from 0
–
9, *, and #, and then select
OK
.
12
Reboot the printer by turning the power switch off and then on.
Send Header
Prints the sender's information on the header of faxes.
Select
Off
to turn this feature off.
Select
On
to turn this feature on.
For information on the region setting, see "Setting Your Region" on page 174.
ECM
You can set whether to enable or disable the ECM (Error Correction Mode).
Modem Speed
You can set the modem speed.
Display Manual Fax Recipients
To set whether to display the fax number of the recipient when manually
sending a fax.
Fax Reports Fax Activity
You can set whether to automatically print a fax activity report after every 50
incoming and outgoing fax communications.
Fax Transmit
You can set whether to print a transmission result after a fax transmission.
Fax Broadcast
You can set whether to print a transmission result after a fax broadcast to
multiple locations.
Option Description