Fuji Xerox DocuPrint CM225FW, User Manual

Page: 225 / 344

Using the Operator Panel Menus and Keypad 225
Remote Receive
Purpose:
To receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Values:
Discard Size
Purpose:
To set the printer to discard images or any text at the bottom of a fax page when the entire page does not fit the
output paper.
Values:
• Transmission Defaults
Purpose:
To configure settings for transmitting fax.
Auto Redial Setup
Purpose:
To configure settings for automatic redial.
Values:
*
1
The default for
Number of Redial
varies depending on region-specific factory.
Dial Type
Purpose:
To select the dialing type.
Values:
NOTE:
• The dialing type that you can select differs depending on the region setting.
Off
* Does not receive a fax by pressing a remote receive code on the external telephone.
On
Receives a fax by pressing a remote receive code on the external telephone.
Remote Receive
Tone
Specifies the tone in two digits to start Remote Receive.
Off
Prints excess images or text at the bottom of a fax page without discarding it.
On
Discards any excess images or text.
Auto Reduction
* Automatically reduces a fax page to fit it onto the appropriate paper size.
Number of Redial 3
*
1
Sets the number of redial attempts to make when the destination fax number is
busy. If you enter 0, the printer will not redial. The value is set in increments of 1.
0-9
Redial Interval 1
* Sets the interval between redial attempts. The value is set in increments of 1
minute.
1-15
Interval Timer 8
* Sets the interval between re-send attempts. The value is set in increments of 1
second.
3-255
PB
* Uses tone dialing.
DP(10PPS)
Sets DP (10PPS) (Dial Pulse, 10 Pulse Per Second) as the dial type.
DP(20PPS)
Sets DP (20PPS) (Dial Pulse, 20 Pulse Per Second) as the dial type.