manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

G.

H:

 Indicates the tire's speed

rating. The speed rating denotes
the speed at which a tire is
designed to be driven for extended

periods of time under a standard
condition of load and inflation

pressure. The tires on your vehicle
may operate at different
conditions for load and inflation

pressure. These speed ratings may
need to be adjusted for the

difference in conditions. The
ratings range from 81 mph
(130 km/h) to 186 mph

(299 km/h). These ratings are
listed in the following chart.

Note:

You may not find this

information on all tires because it
is not required by federal law.

Speed rating

Letter
rating

81 mph (130 km/h)

M

87 mph (140 km/h)

N

99 mph (159 km/h)

Q

106 mph (171 km/h)

R

112 mph (180 km/h)

S

118 mph (190 km/h)

T

124 mph (200 km/h)

U

130 mph (210 km/h)

H

149 mph (240 km/h)

V

Speed rating

Letter
rating

168 mph (270 km/h)

W

186 mph (299 km/h)

Y

Note:

For tires with a maximum

speed capability over 149 mph
(240 km/h), tire manufacturers
sometimes use the letters ZR. For
those with a maximum speed
capability over 186 mph (299
km/h), tire manufacturers always
use the letters ZR.

H.

U.S. DOT Tire Identification

Number (TIN):

 This begins with

the letters DOT and indicates that
the tire meets all federal
standards. The next two numbers
or letters are the plant code
designating where it was
manufactured, the next two are
the tire size code and the last four
numbers represent the week and
year the tire was built. For
example, the numbers 317 mean
the 31st week of 1997. After 2000
the numbers go to four digits. For
example, 2501 means the 25th
week of 2001. The numbers in
between are identification codes
used for traceability. This
information is used to contact
customers if a tire defect requires
a recall.

I.

M+S or M/S:

 Mud and Snow, or

AT:

 All Terrain, or

AS:

 All Season.

259

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Wheels and Tires

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Phonocar VM338 Mounting Instructions preview
VM338
Brand: Phonocar Pages: 6
Volkswagen 1973 Convertible Owner'S Manual preview
1973 Convertible
Brand: Volkswagen Pages: 80
Spiral Audio KT-FI001PB Nstallation Instructions preview
KT-FI001PB
Brand: Spiral Audio Pages: 2
Paccar PACCHARGE AC20 Installation Manual preview
PACCHARGE AC20
Brand: Paccar Pages: 63
Toyota Solara guide Owner'S Manual preview
Solara guide
Brand: Toyota Pages: 497
J. Strong JST506BT Installation Instructions preview
JST506BT
Brand: J. Strong Pages: 2
Prorack K374 Manual preview
K374
Brand: Prorack Pages: 14
Mazda 2006 MPV Quick Tips preview
2006 MPV
Brand: Mazda Pages: 14
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
Truma Mover S Installation & Operation Instructions preview
Mover S
Brand: Truma Pages: 16
Brodit 841488 Quick Start Manual preview
841488
Brand: Brodit Pages: 2
macnil GT ALARM GT1006CB Installation Manual preview
GT ALARM GT1006CB
Brand: macnil Pages: 77
Chrysler 200 Convertible Specifications preview
200 Convertible
Brand: Chrysler Pages: 5
Honda 2013 Crosstour EX Technology Reference Manual preview
2013 Crosstour EX
Brand: Honda Pages: 20
Mr Handsfree BLUE VOICE Quick Reference Manual preview
BLUE VOICE
Brand: Mr Handsfree Pages: 2
Kia Forte 2020 Features & Functions Manual preview
Forte 2020
Brand: Kia Pages: 50
Kia EV6 2022 Manual preview
EV6 2022
Brand: Kia Pages: 70

Brands by name

Popular brands

Load more brands