manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

ECO Cruise

Note:

ECO Cruise is available as a separate

feature on Energi vehicles only. On non
plug-in vehicles it is included in EcoSelect.

This feature saves vehicle energy by
relaxing acceleration compared to
standard cruise control. For example, your
vehicle may temporarily lose speed when
going uphill. When set to on, ECO appears
in the information display when cruise
control is on.

You can switch it on or off in through the
information display.  See 

General

Information

 (page 93).

Settings

ECO Cruise

Driver Assist

Low Engine Use

The low engine use mode is equipped on
Energi models only. The Low Engine Use
mode maintains proper engine lubrication
at sufficient temperature, and will activate
automatically when you drive your vehicle
with limited engine operation. When your
vehicle is in low engine use mode, your
vehicle will automatically run the engine
as necessary.

Note:

If your vehicle is in low engine use

mode when you start your vehicle, a
message will appear in the information
display.  See 

Information Messages

 (page

101).

If you select the EV Now mode while the
vehicle is in the low engine use mode, EV
Now mode will be suspended for as long
as you are in low engine use mode. The low
engine use mode will resume the next time
you start your vehicle and will
automatically stop when no longer needed.

Note:

Cold temperatures will affect the

engine warm up time and the low engine
use mode may operate more frequently.

Note:

An oil change is not required but gives

you the option of not running a low engine
use cycle. Resetting the oil life monitoring
system will suspend the low engine use
mode.

Fuel Freshness

See 

Fuel Quality

 (page 144).

139

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Unique Driving Characteristics

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Federal Signal Corporation CommCenter D1 Series Installation And Service Instructions Manual preview
CommCenter D1 Series
Brand: Federal Signal Corporation Pages: 16
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
TATA Motors Indigo MANZA QUADRAJET 90 Owner'S Manual & Service Book preview
Indigo MANZA QUADRAJET 90
Brand: TATA Motors Pages: 10
SnapPad EQ Round Installation Instructions preview
EQ Round
Brand: SnapPad Pages: 5
Subaru 2007 Impreza Brochure & Specs preview
2007 Impreza
Brand: Subaru Pages: 21
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
Motoalliance VIPER MA11922 Install Instructions Manual preview
VIPER MA11922
Brand: Motoalliance Pages: 8
Harbor Freight Tools 66242 User Manual preview
66242
Brand: Harbor Freight Tools Pages: 12
Honda 0SR95-HL4-211A Installation Instructions preview
0SR95-HL4-211A
Brand: Honda Pages: 3
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
STO N SHO SNS135a Installation Procedures Manual preview
SNS135a
Brand: STO N SHO Pages: 7
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5

Brands by name

Popular brands

Load more brands