manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

or suspected have the tire

inspected by a tire professional.
Tires can be damaged during
off-road use, so inspection after

off-road use is also
recommended.

Age

WARNING

Tires degrade over time
depending on many factors

such as weather, storage
conditions, and conditions of use

(such as load, speed, inflation
pressure) the tires experience
throughout their lives.

In general, tires should be
replaced after six years regardless
of tread wear. However, heat
caused by hot climates or
frequent high loading conditions
can accelerate the aging process
and may require tires to be
replaced more frequently.

You should replace your spare tire
when you replace the road tires or
after six years due to aging even if
it has not been used.

U.S. DOT Tire Identification
Number

Both United States and Canada
Federal regulations require tire
manufacturers to place
standardized information on the
sidewall of all tires. This
information identifies and

describes the fundamental

characteristics of the tire and also
provides a U.S. DOT Tire

Identification Number for safety
standard certification and in case
of a recall.
This begins with the letters DOT
and indicates that the tire meets

all federal standards. The next
two numbers or letters are the

plant code designating where it
was manufactured, the next two
are the tire size code and the last

four numbers represent the week
and year the tire was built. For

example, the numbers 317 mean
the 31st week of 1997. After 2000
the numbers go to four digits. For
example, 2501 means the 25th
week of 2001. The numbers in
between are identification codes
used for traceability. This
information is used to contact
customers if a tire defect requires
a recall.

Tire Replacement
Requirements

Your vehicle is equipped with tires
designed to provide a safe ride
and handling capability.

WARNINGS

Only use replacement tires
and wheels that are the same

size, load index, speed rating and
type (such as P-metric versus
LT-metric or all-season versus
all-terrain) as those originally
provided by Ford. The
recommended tire and wheel size

266

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Wheels and Tires

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
U & Me Brothers LK-168A Manual preview
LK-168A
Brand: U & Me Brothers Pages: 6
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Brand: Z Automotive Pages: 16
Jeep GLADIATOR 2022 Owner'S Manual preview
GLADIATOR 2022
Brand: Jeep Pages: 380
Jaeger 21360508 Fitting Instructions Manual preview
21360508
Brand: Jaeger Pages: 13
Bestop 614.04 Installation Manual preview
614.04
Brand: Bestop Pages: 31
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
FORM FIT 8F 00 Installation Instructions preview
8F 00
Brand: FORM FIT Pages: 2
Acura RLX 2016 Service Bulletin preview
RLX 2016
Brand: Acura Pages: 7
Thule 145012 Quick Start Manual preview
145012
Brand: Thule Pages: 2
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33
Soundoff Signal nERGY ETSA200R-PA Quick Start Manual preview
nERGY ETSA200R-PA
Brand: Soundoff Signal Pages: 3
Truma Mover H SE User Manual preview
Mover H SE
Brand: Truma Pages: 10
Rydeen BSS2 Owner'S Manual preview
BSS2
Brand: Rydeen Pages: 14

Brands by name

Popular brands

Load more brands