Ford 2016 C-MAX ENERGI Owner'S Manual Download

Page: 242 / 395

Air cleaner assembly.

Air cleaner cover.

Air cleaner outlet tube.

Positive crankcase ventilation (PCV) tube.

Air cleaner intake tube.

Removing the Engine Air Filter

Element

E162534

Loosen the hose clamps for air cleaner
outlet tube (C). Disconnect the tube
from the air cleaner assembly (A).

2. Release the tabs and disconnect the

PCV tube (D) from the air cleaner
outlet tube (C) and remove the tube.

3. Disconnect the air cleaner intake tube

(E) from the air cleaner assembly (A).

E162535

4. Remove the bolts from each side of the

air cleaner assembly (A) as shown with
arrows.

E162536

5. Lift the air cleaner assembly (A) from

the mounting studs, then rotate and
pull it toward the front of the vehicle.

E162537

6. Remove the 5 bolts from the air cleaner

cover (B).

Remove the air cleaner cover (B) from
the air cleaner assembly (A).

239

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Maintenance

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Search results

Summary of Contents for 2016 C-MAX ENERGI

Reviews:

Related manuals for 2016 C-MAX ENERGI

Brands by name

Popular brands

Ford 2016 C-MAX ENERGI, Owner'S Manual

Search results

Summary of Contents for 2016 C-MAX ENERGI

Reviews:

Related manuals for 2016 C-MAX ENERGI

Brands by name

Popular brands