manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Tire and Wheel Alignment

A bad jolt from hitting a curb or
pothole can cause the front end
of your vehicle to become

misaligned or cause damage to
your tires. If your vehicle seems to

pull to one side when you’re
driving, the wheels may be out of
alignment. Have an authorized

dealer check the wheel alignment
periodically.
Wheel misalignment in the front
or the rear can cause uneven and

rapid treadwear of your tires and
should be corrected by an
authorized dealer. Front-wheel

drive vehicles and those with an
independent rear suspension may
require alignment of all four
wheels.

The tires should also be balanced
periodically. An unbalanced tire
and wheel assembly may result in
irregular tire wear.

Tire Rotation

Note:

If your tires show uneven

wear ask an authorized dealer to
check for and correct any wheel
misalignment, tire imbalance or
mechanical problem involved
before tire rotation.

Note:

Your vehicle may be

equipped with a dissimilar spare
wheel and tire assembly. A
dissimilar spare wheel and tire

assembly is defined as a spare
wheel and tire assembly that is

different in brand, size or
appearance from the road tires and
wheels. If you have a dissimilar

spare wheel and tire assembly it is
intended for temporary use only

and should not be used in a tire
rotation.

Note:

After having your tires

rotated, inflation pressure must be
checked and adjusted to the

vehicle requirements.

Rotating your tires at the
recommended interval (as
indicated in the scheduled
maintenance information) will
help your tires wear more evenly,
providing better tire performance
and longer tire life.

Front-wheel drive vehicles (front
tires on the left side of the
diagram)

E142547

Non-directional tires

269

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Wheels and Tires

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Accel 2020 Installation Instructions preview
2020
Brand: Accel Pages: 2
PUTCO MOLLE PANELS RAM 2500 Instruction Manual preview
MOLLE PANELS RAM 2500
Brand: PUTCO Pages: 4
Westfalia Portilo 350000 Installation And Operating Instructions Manual preview
Portilo 350000
Brand: Westfalia Pages: 18
Mazda 2007 MazdaSpeed6 Specification preview
2007 MazdaSpeed6
Brand: Mazda Pages: 12
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
Cadillac 2007 SRX Owner'S Manual preview
2007 SRX
Brand: Cadillac Pages: 522
Firestone Ride-Rite Air Helper Springs 2173 Installation Instructions preview
Ride-Rite Air Helper Springs 2173
Brand: Firestone Pages: 4
TAUBENREUTHER 29-T080301 Quick Start Manual preview
29-T080301
Brand: TAUBENREUTHER Pages: 8
Buick Electra 225 1965 Service Manual preview
Electra 225 1965
Brand: Buick Pages: 914
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
Caraudio-Systems RL-LR12-TF Manual preview
RL-LR12-TF
Brand: Caraudio-Systems Pages: 9
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
EUFAB 12014 Manual preview
12014
Brand: EUFAB Pages: 20
Edelbrock Honda XR400 Instruction Supplement preview
Honda XR400
Brand: Edelbrock Pages: 2
Hudson Super Six 1916 Reference Book preview
Super Six 1916
Brand: Hudson Pages: 77
DRAGONFIRE 11-0800 Installation Instructions preview
11-0800
Brand: DRAGONFIRE Pages: 4

Brands by name

Popular brands

Load more brands