manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

TOWING A TRAILER

WARNING

Your vehicle is not approved

for trailer towing. Never tow

a trailer with your vehicle.

TRANSPORTING THE VEHICLE

E143886

If you need to have your vehicle towed,
contact a professional towing service or,
if you are a member of a roadside
assistance program, your roadside
assistance service provider.

We recommend the use of a wheel lift and
dollies or flatbed equipment to tow your
vehicle. Do not tow with a slingbelt. Ford
Motor Company has not approved a
slingbelt towing procedure. Vehicle
damage may occur if towed incorrectly, or
by any other means.

Ford Motor Company produces a towing
manual for all authorized tow truck
operators. Have your tow truck operator
refer to this manual for proper hook-up
and towing procedures for your vehicle.

The front wheels (drive wheels) must be
on a tow dolly when towing your vehicle
from the rear using wheel lift equipment.
This prevents damage to the transmission.

We recommend placing the rear wheels
on a tow dolly when towing your vehicle
from the front using wheel lift equipment.
This prevents damage to the rear fascia.

TOWING THE VEHICLE ON
FOUR WHEELS

Emergency Towing

WARNING

If your vehicle has a steering wheel
lock make sure the ignition is in the
accessory or on position when being

towed.

If your vehicle becomes inoperable
(without access to wheel dollies,
car-hauling trailer, or flatbed transport
vehicle), it can be flat-towed (all wheels
on the ground, regardless of the powertrain
and transmission configuration) under the
following conditions:
•

Tow only in the forward direction.

•

The transmission in position 

N

. If you

cannot move the transmission into 

N

,

you may need to override it.  See

Automatic Transmission

 (page 161).

190

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Towing

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

TATA Motors Nano Owner'S Manual & Service Book preview
Nano
Brand: TATA Motors Pages: 94
GÄN GA Manual preview
GA
Brand: GÄN Pages: 24
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
Nav TV NAV-INREN Quick Manual preview
NAV-INREN
Brand: Nav TV Pages: 2
RAM Truck Diesel Supplement 2012 Owner'S Manual preview
Truck Diesel Supplement 2012
Brand: RAM Pages: 174
Subaru Legacy 2011 Quick Reference Manual preview
Legacy 2011
Brand: Subaru Pages: 19
Mont Blanc ACTIVA+ Assembly Instructions preview
ACTIVA+
Brand: Mont Blanc Pages: 2
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
TATA Motors NEXON Owner'S Manual preview
NEXON
Brand: TATA Motors Pages: 232
Whispbar K723W Fitting Instructions Manual preview
K723W
Brand: Whispbar Pages: 77
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
Honda Civic Coupe 2009 Owner'S Manual preview
Civic Coupe 2009
Brand: Honda Pages: 414
Hotchkis 2205 Installation Instructions preview
2205
Brand: Hotchkis Pages: 5
Dakota Digital Retrotech RTX-33F Installation preview
Retrotech RTX-33F
Brand: Dakota Digital Pages: 2
Siemens HKW-600 Manual preview
HKW-600
Brand: Siemens Pages: 116
Fcar F7S series Product Manual preview
F7S series
Brand: Fcar Pages: 56

Brands by name

Popular brands

Load more brands