manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

When refueling the vehicle fuel tank, do
the following:

1.

When your vehicle has stopped, shift
into park (P) and switch the ignition
off.

E145428

2. Press the fuel filler door release button.

Wait up to fifteen seconds before
opening the fuel filler door. During this
time, a message appears in the
information display. When the door
unlocks a message appears in the
information display indicating that your
vehicle is ready to be refueled. The
vehicle remains ready to refuel for
approximately 20 minutes. If more than
20 minutes elapses, you must press
the fuel filler door release button again.

Note:

You may experience the fuel pump

turning off if you do not press the fuel filler
door release button again.

3. Fully open the fuel tank filler door until

it engages.

E156032

4. Slowly insert the fuel filler nozzle fully

into the fuel system and leave the
nozzle fully inserted until pumping is
complete. Hold the handle higher while
inserting for easier access.

E154765

5. Once pumping is complete, slowly

remove the fuel filler nozzle. Allow
approximately five to ten seconds after
pumping fuel before removing the fuel
filler nozzle. This allows residual fuel
to drain back into the fuel tank and not
spill onto the vehicle.

6. Fully close the fuel filler door until it

clicks shut. This permits the fuel
system to function correctly.

Note:

Do not overfill the fuel tank to the

point that the fuel is able to bypass the fuel
filler nozzle. The overfilled fuel may run
down the drain hole which is below the fuel
filler inlet.

148

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Fuel and Refueling

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Uniden BTSC1500 Owner'S Manual preview
BTSC1500
Brand: Uniden Pages: 16
Uniden BTSC1500 User Manual preview
BTSC1500
Brand: Uniden Pages: 20
iRacing Porsche 911 GT3 R User Manual preview
Porsche 911 GT3 R
Brand: iRacing Pages: 25
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
PAC GM1A-R Quick Start Manual preview
GM1A-R
Brand: PAC Pages: 4
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
Boyo VTL17LTJ Manual preview
VTL17LTJ
Brand: Boyo Pages: 9
SCC Quik Grip Installation And Removal Instructions preview
Quik Grip
Brand: SCC Pages: 4
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Brand: C-KO Pages: 4
Ford ALCON 1968 Owner'S Manual preview
ALCON 1968
Brand: Ford Pages: 52
Cadillac ESCALADE ESV 2005 Owner'S Manual preview
ESCALADE ESV 2005
Brand: Cadillac Pages: 482
curt CM-58967 Installation Manual preview
CM-58967
Brand: curt Pages: 4
Voxx Electronics CA-510a Installation Instructions Manual preview
CA-510a
Brand: Voxx Electronics Pages: 15
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
Ford 2007 Transit Owner'S Handbook Manual preview
2007 Transit
Brand: Ford Pages: 46
Air Lift RideControl 59540 Manual preview
RideControl 59540
Brand: Air Lift Pages: 10

Brands by name

Popular brands

Load more brands