manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Note:

Check your wiper function in the

information display.  See 

General

Information

 (page 93).  The autowipers

feature functions only when you select the
menu choice in the information display and
you move the wiper lever up to the first
position. The autowipers feature then
remains on in the information display menu
until you change it to intermittent wipe.

Note:

If you switch autolamps on in

conjunction with autowipers, your low beam
headlamps turn on automatically when the
rain sensor activates the windshield wipers
continuously.  See 

Autolamps

 (page 75).

Keep the outside of the windshield clean.
The rain sensor is very sensitive. If the area
around the mirror is dirty, then the wipers
may operate if dirt, mist or insects hit the
windshield.

Wet or winter driving conditions with ice,
snow or salty road mist can cause
inconsistent and unexpected wiping or
smearing. In these conditions, you can do
the following to help keep your windshield
clear:
•

Lower the sensitivity of the autowipers
to reduce the amount of smearing.

•

Switch to normal or high-speed wipe
by moving the wiper lever up.

•

Switch the autowipers off and switch
intermittent mode on through the
information display.  See 

General

Information

 (page 93).

•

Switch the autowipers off by moving
the wiper lever down.

Note:

Clean the windshield and wiper

blades if they begin to leave streaks or
smears. If that does not resolve the issue,
install new wiper blades.  See 

Changing

the Wiper Blades

 (page 229).

WINDSHIELD WASHERS

Note:

Do not operate the washers when

the washer reservoir is empty. This may
cause the washer pump to overheat.

E197528

To operate the washers and spray the
windshield, pull the lever toward you.
When you release the lever, the wipers will
operate for a short time.

REAR WINDOW WIPER AND
WASHERS

Rear Window Wiper

Note:

Make sure you switch the rear

window wiper and ignition off before using
an automatic car wash.

E197647

Intermittent wipe.

A

Low speed wipe.

B

Off.

C

72

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Wipers and Washers

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Toyota 2012 Rav4 Owner'S Manual preview
2012 Rav4
Brand: Toyota Pages: 529
Gardigo MARTEN-FREE CAR Instruction Manual preview
MARTEN-FREE CAR
Brand: Gardigo Pages: 36
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
Cadillac ESCALADE FAMILY - SPECIFICATIONS 2011 Specifications preview
ESCALADE FAMILY - SPECIFICATIONS 2011
Brand: Cadillac Pages: 1
Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
Mazdaspeed QSEA 51 96Z Installation And User Instructions Manual preview
QSEA 51 96Z
Brand: Mazdaspeed Pages: 8
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
tams elektronik 54-01016 Manual preview
54-01016
Brand: tams elektronik Pages: 44
Honda 1991 Civic Online Reference Owner'S Manual preview
1991 Civic
Brand: Honda Pages: 124

Brands by name

Popular brands

Load more brands