manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

E175978

* When inflation only is required
for a tire or other objects, the
selector must be in the Air

position.

What to Do When a Tire Is
Punctured

Repair a tire puncture within the tire's tread
area in two stages with the kit.

•

In the first stage, inflate the tire with a
sealing compound and air. After you
inflate the tire, you will need to drive
the vehicle a short distance (about 4
miles [6 kilometers]) to distribute the
sealant in the tire.

•

In the second stage, check the tire
pressure and adjust, if necessary, to the
vehicle's specified tire inflation
pressure.

First Stage: Inflating the Tire with
Sealing Compound and Air

WARNINGS

Do not stand directly over the kit
while inflating the tire. If you notice
any unusual bulges or deformations

in the tire's sidewall during inflation, stop
and call roadside assistance.

If the tire does not inflate to the
recommended tire pressure within
15 minutes, stop and call roadside

assistance.

Do not run the engine during kit
operation unless the vehicle is
outdoors or in a well-ventilated area.

Preparation: Park the vehicle in a safe, level
and secure area, away from moving traffic.

Switch the hazard lights on. Apply the
parking brake and switch the engine off.
Inspect the flat tire for visible damage.

Sealant compound contains latex. Use
appropriate precautions to avoid any
allergic reactions.

Do not remove any foreign object that has
pierced the tire. If a puncture is located in
the tire sidewall, stop and call roadside
assistance.

1.

Remove the valve cap from the tire
valve.

2. Unwrap the dual purpose hose (black

tube) from the back of the compressor
housing.

3. Fasten the hose to the tire valve by

turning the connector clockwise.
Tighten the connection securely.

E175979

4. Plug the power cable into the 12-volt

power point in the vehicle.

251

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Wheels and Tires

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Safe Fleet PRIME DESIGN VCR 326 Assembly Instructions Manual preview
PRIME DESIGN VCR 326
Brand: Safe Fleet Pages: 16
Safe Fleet Prime Design VBC PC11 Quick Start Manual preview
Prime Design VBC PC11
Brand: Safe Fleet Pages: 8
Safe Fleet Prime Design AR1418 Manual preview
Prime Design AR1418
Brand: Safe Fleet Pages: 4
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
Rola LRSA2 Pack Contents & Fitting Instructions preview
LRSA2
Brand: Rola Pages: 3
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17
Mercedes-Benz 240 D 1979 Owner'S Manual preview
240 D 1979
Brand: Mercedes-Benz Pages: 91
Skoda KAROQ 2017 Owner'S Manual preview
KAROQ 2017
Brand: Skoda Pages: 324
SSV Works RG4-DM3 Manual preview
RG4-DM3
Brand: SSV Works Pages: 2
Roadmaster Even Brake 9400 Owner'S Manual preview
Even Brake 9400
Brand: Roadmaster Pages: 20
Ford 2002 F-250 Owner'S Manual preview
2002 F-250
Brand: Ford Pages: 264
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2
Whelen Engineering Company SAK5 Installation Manual preview
SAK5
Brand: Whelen Engineering Company Pages: 2
Oldsmobile GM DELTA 88 1974 Owner'S Manual preview
GM DELTA 88 1974
Brand: Oldsmobile Pages: 88
Oldsmobile VISTA-CRUISER 1970 Owner'S Manual preview
VISTA-CRUISER 1970
Brand: Oldsmobile Pages: 67
Adaptiv Mini CAM-AU9-AD Fitting & User Manual preview
CAM-AU9-AD
Brand: Adaptiv Mini Pages: 4

Brands by name

Popular brands

Load more brands