manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

2. Close the window a third time to the

point of resistance. The bounce-back
feature is now disabled and you can
close the window manually. The
window will go past the point of
resistance and you can close it fully.

See an authorized dealer as soon as
possible if the window does not close after
the third attempt.

Resetting the Bounce-Back Feature

WARNING

The bounce-back feature remains
turned off until you reset the
memory.

If you have disconnected the battery, you
must reset the bounce-back memory
separately for each window.

1.

Lift and hold the switch until the
window is fully closed.

2. Release the switch.

3. Lift the switch again for one more

second.

4. Press and hold the switch until the

window is fully open.

5. Release the switch.

6. Lift and hold the switch until the

window is fully closed.

7.

Open the window and then try to close
it automatically.

8. Reset and repeat the procedure if the

window does not close automatically.

Accessory Delay

 (If Equipped)

You can use the window switches for
several minutes after you switch the
ignition off or until you open either front
door.

GLOBAL OPENING

You can use the remote control to operate
the windows with the ignition off.

Note:

To operate this feature, accessory

delay must not be active.

Opening the Windows

You can use the global opening feature to
open the windows only for a short time
after you unlock your vehicle by using the
remote control.

To use the global opening feature:
1.

Press and release the remote control
unlock button.

2. Press the remote control unlock button

again and hold it for approximately
three seconds. Release the control
when the windows begin to open.

3. Press the lock or unlock button on your

remote control to stop the window
opening function.

Note:

Contact an authorized Ford dealer to

deactivate this feature.

EXTERIOR MIRRORS

Power Exterior Mirrors

WARNING

Do not adjust the mirrors when your
vehicle is moving.

81

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Windows and Mirrors

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Jeep Compass Overview Manual preview
Compass
Brand: Jeep Pages: 25
Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
STARLANE POLE STAR PRO Installation And Instruction Manual preview
POLE STAR PRO
Brand: STARLANE Pages: 24
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Oldsmobile 2003 Alero Owner'S Manual preview
2003 Alero
Brand: Oldsmobile Pages: 354
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
Quadratec 11113.1435 Quick Start Manual preview
11113.1435
Brand: Quadratec Pages: 14
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
Honda 2009 S2000 Owner'S Manual preview
2009 S2000
Brand: Honda Pages: 268
Carcomm CMPC-22 Fujitsu-Siemens PocketLoox 410 Installation Manual preview
CMPC-22 Fujitsu-Siemens PocketLoox 410
Brand: Carcomm Pages: 2
Connects2 CTUPO01 Quick Start Manual preview
CTUPO01
Brand: Connects2 Pages: 8

Brands by name

Popular brands

Load more brands