manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

E142846

Children must always be properly
restrained. Accident statistics suggest that
children are safer when properly restrained
in the rear seating positions than in the
front seating position. Failure to follow
these instructions may increase the risk of
injury in a crash.

FRONT PASSENGER SENSING
SYSTEM

WARNINGS

Even with Advanced Restraints
Systems, children 12 and under
should be properly restrained in a

rear seating position. Failure to follow this
could seriously increase the risk of injury or
death.

Sitting improperly out of position or
with the seatback reclined too far
can take off weight from the seat

cushion and affect the decision of the front
passenger sensing system, resulting in
serious injury or death in a crash.

Always sit upright against your
seatback, with your feet on the floor.

Any alteration or modification to the
front passenger seat may affect the
performance of the front passenger

sensing system which could seriously
increase the risk of injury or death.

This system works with sensors that are
part of the front passenger seat and safety
belt to detect the presence of a
properly–seated occupant and determine
if the front passenger frontal airbag should
be enabled (may inflate) or not.

E183107

The front passenger sensing system uses
a passenger airbag off indicator which will
illuminate and stay lit to remind you that
the front passenger frontal airbag is
disabled. The indicator lamp is located in
the center stack of the instrument panel.

Note:

When the ignition is first turned on,

the passenger airbag off light will illuminate
for a short period of time to confirm it is
functional.

The front passenger sensing system is
designed to disable (will not inflate) the
front passenger frontal airbag when the
front passenger seat is unoccupied, or a
rear facing infant seat, a forward-facing
child restraint, or a booster seat is
detected. Even with this technology,
parents are 

strongly

 encouraged to

always properly restrain children in the rear
seat. The sensor also turns off the
passenger front airbag and seat-mounted
side airbag when the passenger seat is
empty.

37

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Supplementary Restraints System

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
UMBRA RIMORCHI 39030 Installation Instructions Manual preview
39030
Brand: UMBRA RIMORCHI Pages: 18
Vauxhall 2009 Tigra Quick Reference Manual preview
2009 Tigra
Brand: Vauxhall Pages: 2
Roav R5141 Owner'S Manual preview
R5141
Brand: Roav Pages: 10
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Honda 2011 Civic Sedan Vehicle Instruction Card preview
2011 Civic Sedan
Brand: Honda Pages: 5
Suzuki 990E0-54P56-000 Installers And Users Instructions preview
990E0-54P56-000
Brand: Suzuki Pages: 12
Softride 26428 Instructions preview
26428
Brand: Softride Pages: 4
ICON 91824E Installation Instructions preview
91824E
Brand: ICON Pages: 4
Metra Electronics 99-5026 Installation Instructions Manual preview
99-5026
Brand: Metra Electronics Pages: 20
Mazda 3 Facelift 2006 Training Manual preview
3 Facelift 2006
Brand: Mazda Pages: 94
FORM FIT 8F 00 Installation Instructions preview
8F 00
Brand: FORM FIT Pages: 2
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
Renault Laguna III Manual preview
Laguna III
Brand: Renault Pages: 3699
Kuda 293950 Installation Instruction preview
293950
Brand: Kuda Pages: 3
Edelbrock Turbocharger 15012 Installation Instructions preview
Turbocharger 15012
Brand: Edelbrock Pages: 1
GMC Yukon XL Denali 2015 Owner'S Manual preview
Yukon XL Denali 2015
Brand: GMC Pages: 439

Brands by name

Popular brands

Load more brands