manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Note:

To reduce humidity build-up inside

your vehicle, do not drive with the system
switched off or with recirculated air always
switched on.

Note:

Do not place objects under the front

seats as this may interfere with the airflow
to the rear seats.

Note:

Remove any snow, ice or leaves from

the air intake area at the base of the
windshield.

Note:

To improve the time to reach a

comfortable temperature in hot weather,
drive with the windows open until you feel
cold air through the air vents.

In mild weather, you can improve your fuel
economy when using the climate control
system by using outside air instead of air
conditioning:
•

Turn the temperature control knob(s)
so the interior temperature is set to
59°F (15°C).

•

Set the air distribution to panel or floor
(or both).

•

Press 

A/C

 to turn the air conditioning

off.

•

Press the recirculated air button so
fresh air enters the vehicle.

•

Press the fan button until the fan is at
its lowest setting.

Automatic Climate Control

Note:

 Adjusting the settings when your

vehicle interior is extremely hot or cold is
not necessary.  The system automatically
adjusts to heat or cool the interior to your
selected temperature as quickly as possible.
For the system to function efficiently, the
instrument panel and side air vents should
be fully open.

Note:

If you select 

AUTO

 during cold

outside temperatures, the system directs
airflow to the windshield and side window
vents. In addition, the fan may run at a
slower speed until the engine warms up.

Note:

If you select 

AUTO

 during hot outside

temperatures, or when the inside of the
vehicle is hot, the system automatically uses
recirculated air to maximize interior cooling.
When the interior reaches the selected
temperature, the system automatically
switches to using outside air.

Heating the Interior Quickly

1.

Press the 

AUTO

 button.

2. Adjust the temperature control to the

desired setting.

Recommended Settings for

Heating

1.

Press the 

AUTO

 button.

2. Adjust the temperature control to the

desired setting. Use 72°F (22°C) as a
starting point, then adjust the setting
as necessary.

Cooling the Interior Quickly

Press the 

MAX A/C

 button.

Recommended Settings for
Cooling

1.

Press the 

AUTO

 button.

2. Adjust the temperature control to the

desired setting. Use 72°F (22°C) as a
starting point, then adjust the setting
as necessary.

Side Window Defogging in Cold
Weather

1.

Press the defrost and panel buttons.

2. Select 

A/C

.

3. Adjust the temperature control to the

desired setting. Use 72°F (22°C) as a
starting point, then adjust the setting
as necessary.

4. Adjust the fan speed to a high speed

setting.

110

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Climate Control

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Happy Orange USB-C Quick Start Manual preview
USB-C
Brand: Happy Orange Pages: 2
SAF-HOLLAND FleetMaster Air FW8 Series Owner'S Manual preview
FleetMaster Air FW8 Series
Brand: SAF-HOLLAND Pages: 20
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
Monacor Carpower CAP-20 Quick Manual preview
Carpower CAP-20
Brand: Monacor Pages: 2
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
VDO RUDDER ANGLE INDICATOR Installation Instructions Manual preview
RUDDER ANGLE INDICATOR
Brand: VDO Pages: 8
Chevrolet 1996 Cavalier Owner'S Manual preview
1996 Cavalier
Brand: Chevrolet Pages: 372
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
NavInc CP-PEU-GV3 Manual preview
CP-PEU-GV3
Brand: NavInc Pages: 6
E&G Classics Denali 1094-0185-15 Instruction Manual preview
Denali 1094-0185-15
Brand: E&G Classics Pages: 3

Brands by name

Popular brands

Load more brands