manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

E146092

•

Provides additional grade braking with
a combination of engine motoring and
high-voltage battery charging to help
maintain vehicle speed when
descending a grade.

•

As your vehicle determines the amount
of engine motoring and high-voltage
battery charging, you may notice the
engine speed increasing and
decreasing to help maintain your
vehicle speed when descending a
grade.

•

The grade assist lamp in the instrument
cluster is illuminated.

E144523

The grade assist lamp will
appear in the instrument cluster
when grade assist is turned on.

Press the transmission control switch
again to return to normal drive (D).

Brake-Shift Interlock

WARNINGS

Do not drive your vehicle until you
verify that the brake lamps are
working.

WARNINGS

When doing this procedure, you will
be taking your vehicle out of park
which means your vehicle can roll

freely. To avoid unwanted vehicle
movement, always fully set the parking
brake prior to doing this procedure. Use
wheel chocks if appropriate.

If the parking brake is fully released,
but the brake warning lamp remains
illuminated, the brakes may not be

working properly. See your authorized
dealer.

Note:

See your authorized dealer as soon

as possible if this procedure is used.

Note:

For some markets this feature will be

disabled.

Use the brake shift interlock lever to move
the gearshift lever from the park position
in the event of an electrical malfunction or
if your vehicle has a dead battery.

Apply the parking brake and turn the
ignition off before performing this
procedure.

162

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Transmission

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Wagan 2591 User Manual preview
2591
Brand: Wagan Pages: 12
Uebler F42 Mounting And Operating Instructions preview
F42
Brand: Uebler Pages: 18
Alpine eX-10 Installation Manual preview
eX-10
Brand: Alpine Pages: 8
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
AMP Research 75135-01A Installation Manual preview
75135-01A
Brand: AMP Research Pages: 12
Havis-Shields Half Size Trunk Box Organizer C-TBO-CV Installation Instructions preview
Half Size Trunk Box Organizer C-TBO-CV
Brand: Havis-Shields Pages: 1
Volvo S60 2012 Quick Manual preview
S60 2012
Brand: Volvo Pages: 8
Q Mobility Group Q Access Alpha GSE 2023 Installation Manual preview
Q Access Alpha GSE 2023
Brand: Q Mobility Group Pages: 9
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
Prorack K544 Fitting Instructions Manual preview
K544
Brand: Prorack Pages: 20
Tellur BASIC TLL171231 User Manual preview
BASIC TLL171231
Brand: Tellur Pages: 5
Westin 31-0190 Installation Instructions preview
31-0190
Brand: Westin Pages: 2
Maserati Grecale 2023 Owner'S Manual preview
Grecale 2023
Brand: Maserati Pages: 302
JBL smartbase Quick Start Manual preview
smartbase
Brand: JBL Pages: 12
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Brand: Waeco Pages: 120
Honda 2001 CR-V Owner'S Manual preview
2001 CR-V
Brand: Honda Pages: 326
Safe Fleet PRIME DESIGN UXV 211 Quick Start Manual preview
PRIME DESIGN UXV 211
Brand: Safe Fleet Pages: 8

Brands by name

Popular brands

Load more brands