manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Note:

Fuel Economy will be impacted by

your use of brakes, accelerator and
accessories, as well as environmental
conditions such as hills and weather.

Note:

Fuel economy is not always a

measure of appropriate driving behavior. For
example, when driving uphill and
maintaining an appropriate speed, your
instant fuel economy may not be good
(losing leaves) but the Coach may show a
blue bar for Acceleration and Cruising.

Common Displays

Both Average fuel economy and an
instantaneous fuel economy gauge are
included in Engage, Empower, MyView (if
selected) and Fuel Economy (shown in
Hybrid Mode) on the left information
display. They are also included in Fuel
History on the right information display.

Average Fuel Economy

Average Fuel Economy is continuously
averaged since the last reset. You can reset
your average fuel economy by pressing and
holding the 

OK

 button on the

corresponding steering wheel controls. For
Energi vehicles both Hybrid and Plug-in
Power mode operation will be included in
the calculation.

Note:

Average fuel economy cannot be

reset in MyView.

Instantaneous Fuel Economy

If your instantaneous fuel economy is
greater than the maximum value
displayed, a + sign will be shown next to
the maximum scale number. When your
vehicle is operating on battery power only,
EV will display and the gauge fill will show
in blue.

INFORMATION MESSAGES

Note:

Depending on the vehicle options

equipped with your vehicle, not all of the
messages display or are available. Certain
messages may be abbreviated or shortened
depending upon which cluster type you
have.

E130248

Press the OK button to acknowledge and
remove some messages from the
information display. Other messages are
be removed automatically after a short
time.

Certain messages need to be confirmed
before you can access the menus.

101

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Information Displays

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Parrot CK 3000 Evolution Specifications preview
CK 3000 Evolution
Brand: Parrot Pages: 2
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Brand: Subaru Pages: 3
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16
Safe Fleet RVS-218627 Instruction Manual preview
RVS-218627
Brand: Safe Fleet Pages: 38
Subaru 2016 Outback Owner'S Manual preview
2016 Outback
Brand: Subaru Pages: 99
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
Nav TV W204PGM Operation Instructions preview
W204PGM
Brand: Nav TV Pages: 3
femkes Hopper on Top User Manual preview
Hopper on Top
Brand: femkes Pages: 7
Mercedes-Benz 2016 SLK Operator'S Manual preview
2016 SLK
Brand: Mercedes-Benz Pages: 358
A-Tach 50092 Quick Start Manual preview
50092
Brand: A-Tach Pages: 2
RAM Ram 3500 2012 Specifications preview
Ram 3500 2012
Brand: RAM Pages: 13
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
ULTIMATE SPEED 91449 Operation And Safety Notes preview
91449
Brand: ULTIMATE SPEED Pages: 34
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
Whispbar WB751 Manual preview
WB751
Brand: Whispbar Pages: 15
Kia OPTIA hybrid 2020 Features & Functions Manual preview
OPTIA hybrid 2020
Brand: Kia Pages: 54
Cadillac 2001 Eldorado Owner'S Manual preview
2001 Eldorado
Brand: Cadillac Pages: 335
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4

Brands by name

Popular brands

Load more brands