manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Installing the Engine Air Filter

Element

Note:

Clean the inside of the air cleaner

assembly before installing a new air filter
element.

E162538

1.

Install the new air filter element into
the engine air cleaner assembly.

2. Install the air cleaner cover (B) and

tighten the 5 bolts.

E162539

3. Position the air cleaner assembly (A)

onto the engine and make sure the
assembly is aligned with the studs.

E162540

4. Install and tighten the bolts to each

side of the air cleaner assembly (A) as
shown with arrows.

5. Attach the air cleaner intake tube (E)

to the air cleaner assembly (A).

E162541

6. Connect the PCV tube (D) to the air

cleaner outlet tube (C).

7.

Connect the air cleaner intake tube (E)
to the air cleaner assembly (A).

240

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Maintenance

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

RaceChip XLR User Manual preview
XLR
Brand: RaceChip Pages: 20
Safe Fleet PRIME DESIGN VRI3-E-PM11 Manual preview
PRIME DESIGN VRI3-E-PM11
Brand: Safe Fleet Pages: 12
OCTO SmartDiag2GO GD201-O User Manual preview
SmartDiag2GO GD201-O
Brand: OCTO Pages: 5
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
Whispbar K448W Fitting Instructions Manual preview
K448W
Brand: Whispbar Pages: 15
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
Buick 2015 LaCrosse Getting To Know Manual preview
2015 LaCrosse
Brand: Buick Pages: 20
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
Linear Logic scangauge2 Quick Start Manual preview
scangauge2
Brand: Linear Logic Pages: 8
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
SuperATV IN-WS-K-TRX Installation Instructions preview
IN-WS-K-TRX
Brand: SuperATV Pages: 2
PowerMadd Tri-Mount 34269 Mounting Tips preview
Tri-Mount 34269
Brand: PowerMadd Pages: 2
Volkswagen 2K3 061 161 A Installation Instructions preview
2K3 061 161 A
Brand: Volkswagen Pages: 2
Yakima K846 Instructions Manual preview
K846
Brand: Yakima Pages: 10
Yakima K757 Instructions Manual preview
K757
Brand: Yakima Pages: 9
Maserati MC20 2022 Owner'S Manual preview
MC20 2022
Brand: Maserati Pages: 288
HOOKE ROAD BXG.8207 Quick Start Manual preview
BXG.8207
Brand: HOOKE ROAD Pages: 7
DV8 LPBR-02 Installation Manual preview
LPBR-02
Brand: DV8 Pages: 4

Brands by name

Popular brands

Load more brands