manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Closing the Liftgate

E155976

A handle is located inside the liftgate to
help with closing.

POWER LIFTGATE

 (If Equipped)

WARNINGS

It is extremely dangerous to ride in a
cargo area, inside or outside of a
vehicle. In a crash, people riding in

these areas are more likely to be seriously
injured or killed. Do not allow people to ride
in any area of your vehicle that is not
equipped with seats and seatbelts. Make
sure everyone in your vehicle is in a seat
and properly using a seatbelt. Failure to
follow this warning could result in serious
personal injury or death.

Make sure to close and latch the
liftgate to prevent drawing exhaust
fumes into your vehicle. This will also

prevent passengers and cargo from falling
out. If you must drive with the liftgate open,
keep the vents or windows open so outside
air comes into your vehicle. Failure to
follow this warning could result in serious
personal injury.

Keep keys out of reach of children.
Do not allow children to operate or
play near an open or moving power

liftgate. You should supervise the
operation of the power liftgate at all times.

Note:

Make sure that you close the liftgate

before operating or moving your vehicle,
especially in an enclosure, like a garage or
a parking structure. This could damage the
liftgate and its components.

Note:

 Do not hang anything, for example

a bike rack, from the glass or liftgate.  This
could damage the liftgate and its
components.

The liftgate only operates with the
transmission in park (P).

If there is a problem with the open or close
request, a tone will sound for one of the
following reasons:

•

The ignition is on and the transmission
is not in park (P).

•

The battery voltage is below the
minimum operating voltage.

•

The liftgate is not fully closed and your
vehicle speed is at or above 3 mph
(5 km/h).

If the liftgate starts to close after it has
fully opened, this indicates there may be
excessive weight on the liftgate or a
possible gas strut failure. A repetitive tone
sounds and the liftgate closes under
control. Remove any excessive weight from
the liftgate. If the liftgate continues to
close after opening, have the system
checked by an authorized dealer.

Opening and Closing the Liftgate

WARNING

Make sure all persons are clear of the
power liftgate area before using the
power liftgate control.

Note:

 Be careful when opening or closing

the liftgate in a garage or other enclosed
area to avoid damaging the liftgate.

Note:

 Do not leave the liftgate open while

driving.  This could damage the liftgate and
its components.

61

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Locks

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Mercedes-Benz GUARD S 500 Supplement To Operators Manual preview
GUARD S 500
Brand: Mercedes-Benz Pages: 30
Phonocar VM338 Mounting Instructions preview
VM338
Brand: Phonocar Pages: 6
Chevrolet 2013 Spark Specifications preview
2013 Spark
Brand: Chevrolet Pages: 2
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
Sears 580.32601 Owner'S Manual preview
580.32601
Brand: Sears Pages: 41
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58
Pet Gear TRI-FOLD PG9300RF Instruction Manual preview
TRI-FOLD PG9300RF
Brand: Pet Gear Pages: 4
EUFAB 16458 Operating Instructions Manual preview
16458
Brand: EUFAB Pages: 16
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5
Mercedes-Benz MY17 c-class Operator'S Manual preview
MY17 c-class
Brand: Mercedes-Benz Pages: 354
Honda 1991 Civic Online Reference Owner'S Manual preview
1991 Civic
Brand: Honda Pages: 124
Griffin Technology iTrip Bluetooth User Manual preview
iTrip Bluetooth
Brand: Griffin Technology Pages: 6
Mitsubishi Pajero Pinin 1999 Workshop Manual preview
Pajero Pinin 1999
Brand: Mitsubishi Pages: 919
Bracketron Multi Vehicle Mount MVM-35-05 Installation Manual preview
Multi Vehicle Mount MVM-35-05
Brand: Bracketron Pages: 4
Volkswagen Zubehör 000 071 105 D Installation Instructions Manual preview
000 071 105 D
Brand: Volkswagen Zubehör Pages: 133

Brands by name

Popular brands

Load more brands