manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

Share
Download
Ford 2016 C-MAX ENERGI Owner'S Manual Download Page 251

•

Check under the hood for any foreign
material that may have collected
during storage such as mice or squirrel
nests.

•

Check the exhaust for any foreign
material that may have collected
during storage.

•

Check tire pressures and set tire
inflation per the Tire Label.

•

Check brake pedal operation. Drive
your vehicle 15 ft (4.5 m) back and
forth to remove rust build-up.

•

Check fluid levels (including coolant
and gas) to make sure there are no
leaks, and fluids are at recommended
levels.

•

If you remove the 12-volt battery, clean
the cable ends and inspect.

Contact an authorized dealer if you have
any concerns or issues.

248

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Vehicle Care

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands