manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Note:

The service disconnect has an outer

lever to aid in the proper seating of the
service disconnect lever. Remove this to
disconnect the high-voltage service
disconnect.

The high-voltage service disconnect is
located behind the rear fold down seats.

Service disconnect location for non-Energi
vehicles.

E163537

Service disconnect location for Energi
vehicles.

E163538

Disabling the High-Voltage Battery

1.

Fold down the rear seats and remove
the cover panel.

2. Locate the access door and remove

the plastic cover.

E171514

3. Pull the outer cover off to expose the

service disconnect lever.

E147234

4. Slide the handle on the service

disconnect outboard to the right. For
Energi vehicles, slide the handle
outboard and to the left.

E146133

154

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

High Voltage Battery

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Samsung HF1000 User Manual preview
HF1000
Brand: Samsung Pages: 133
Jeep Automobile Service And Warranty Handbook preview
Automobile
Brand: Jeep Pages: 42
Jeep Automobile Warranty Information Booklet preview
Automobile
Brand: Jeep Pages: 44
Cadillac ATS 2015 Convenience/Personalization Manual preview
ATS 2015
Brand: Cadillac Pages: 20
Jeep Automobile Service Contract preview
Automobile
Brand: Jeep Pages: 7
Cadillac 2016 ELR Convenience/Personalization Manual preview
2016 ELR
Brand: Cadillac Pages: 20
Cadillac 2016 CTS Manual preview
2016 CTS
Brand: Cadillac Pages: 354
Cadillac 2005 CTS Personalization Manual preview
2005 CTS
Brand: Cadillac Pages: 20
Cadillac 2014 XTS Convenience/Personalization Manual preview
2014 XTS
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Specifications preview
ATS 2014
Brand: Cadillac Pages: 10
Cadillac 2013 Escalade ESV Owner'S Manual preview
2013 Escalade ESV
Brand: Cadillac Pages: 524
Cadillac 2013 ATS Personalization Manual preview
2013 ATS
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owenrs Manual preview
ATS 2013
Brand: Cadillac Pages: 438
Cadillac 2013 ATS Owner'S Manual preview
2013 ATS
Brand: Cadillac Pages: 450
Cadillac 2011 Escalade Hybrid Owner'S Manual Addendum preview
2011 Escalade Hybrid
Brand: Cadillac Pages: 94
Cadillac 2011 Escalade Hybrid Owner'S Manual preview
2011 Escalade Hybrid
Brand: Cadillac Pages: 94
Cadillac 2011 CTS COUPE Navigation Manual preview
2011 CTS COUPE
Brand: Cadillac Pages: 78
Cadillac 2011 CTS COUPE Brochure preview
2011 CTS COUPE
Brand: Cadillac Pages: 8

Brands by name

Popular brands

Load more brands