manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Note:

When you try to restart your vehicle

after a fuel shutoff, the vehicle makes sure
that the electrical system is safe to restart.
Once your vehicle determines that the
electrical system is safe, then the vehicle
will allow you to restart.

Note:

In the event that your vehicle does

not restart after your third attempt, contact
an authorized dealer.

JUMP STARTING THE VEHICLE

WARNINGS

The gases around the battery can
explode if exposed to flames, sparks
or lit cigarettes. An explosion could

result in injury or vehicle damage.

Batteries contain sulfuric acid which
can burn skin, eyes and clothing, if
contacted.

Do not attempt to push-start your
automatic transmission vehicle. Automatic
transmissions do not have push-start
capability. Attempting to push-start a
vehicle with an automatic transmission
may cause transmission damage.

Preparing Your Vehicle

Note:

Use only a 12-volt supply to start your

vehicle.

Note:

Do not disconnect the battery of the

disabled vehicle as this could damage the
vehicle's electrical system.

1.

Park the booster vehicle close to the
hood of the disabled vehicle making
sure the two vehicles do not touch. Set
the parking brake on both vehicles and
stay clear of the engine cooling fan and
other moving parts.

2. Check all battery terminals and remove

any excessive corrosion before you
attach the battery cables. Ensure that
vent caps are tight and level.

3. Turn the heater fan on in both vehicles

to protect from any electrical surges.
Turn all other accessories off.

Connecting the Jumper Cables

Your vehicle has a 12-volt battery that has
two prongs accessible from under the
hood. Your vehicle can be jumped the
same way conventional vehicles can by
using these prongs. The illustration below
shows the two connector prongs used for
jump-starting your vehicle.

E192363

A. Positive prong (+)

B. Negative prong (-)

Note:

In the illustration, the vehicle on the

bottom is used to designate the assisting
(boosting) battery.

Note:

Remove the red cap from the positive

prong (A) on your vehicle before connecting
the cables.

197

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Roadside Emergencies

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Daihatsu Mira Manual preview
Mira
Brand: Daihatsu Pages: 340
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
Rola LRSA2 Pack Contents & Fitting Instructions preview
LRSA2
Brand: Rola Pages: 3
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
Alfa Romeo Giulietta 2.0 JTDM Manual preview
Giulietta 2.0 JTDM
Brand: Alfa Romeo Pages: 14
Lexus 2015 LX 570 Settings User Manual preview
2015 LX 570
Brand: Lexus Pages: 6
Mazda 2006 MPV Quick Tips preview
2006 MPV
Brand: Mazda Pages: 14
Kargo Master PRO-IV Assembly Instructions Manual preview
PRO-IV
Brand: Kargo Master Pages: 8
Yakima FreshSesh PowderHound Manual preview
FreshSesh PowderHound
Brand: Yakima Pages: 18
Gator ARV50T User Manual preview
ARV50T
Brand: Gator Pages: 18
Honda 2008 S2000 Manual preview
2008 S2000
Brand: Honda Pages: 280
Toyota GR Supra 2021 Quick Reference Manual preview
GR Supra 2021
Brand: Toyota Pages: 48
SSANGYONG Korando 2012 Manual preview
Korando 2012
Brand: SSANGYONG Pages: 1104
Cap-Pack Sport CPS-5 Easy Installation Manual preview
CPS-5
Brand: Cap-Pack Sport Pages: 2
Sena 50S Quick Start Manual preview
50S
Brand: Sena Pages: 2
CrimeStopper B350C510-B(S) Ower'S Manual preview
B350C510-B(S)
Brand: CrimeStopper Pages: 2

Brands by name

Popular brands

Load more brands