manualshive.com logo in svg

Ford 2016 C-MAX ENERGI, Owner'S Manual

The Ford 2016 C-MAX ENERGI Owner's Manual is a comprehensive guide that provides essential information about this exceptional vehicle. With our user-friendly website, you can easily download the manual for free, directly from manualshive.com, ensuring you have all the valuable insights for an effortless ownership experience.

Share
Download
background image

Information Contained on the

Tire Sidewall

Both United States and Canada
Federal regulations require tire

manufacturers to place
standardized information on the

sidewall of all tires. This
information identifies and
describes the fundamental

characteristics of the tire and also
provides a U.S. DOT Tire

Identification Number for safety
standard certification and in case
of a recall.

Information on P Type Tires

H

I

J

K

L

M

A

B

C D

E

F

G

E142543

P215/65R15 95H is an example of
a tire size, load index and speed
rating. The definitions of these
items are listed below. (Note that
the tire size, load index and speed
rating for your vehicle may be
different from this example.)

A.

P:

 Indicates a tire, designated

by the Tire and Rim Association,
that may be used for service on
cars, sport utility vehicles,

minivans and light trucks.

Note:

 If

your tire size does not begin with

a letter this may mean it is
designated by either the European
Tire and Rim Technical

Organization or the Japan Tire
Manufacturing Association.
B.

215:

 Indicates the nominal

width of the tire in millimeters

from sidewall edge to sidewall
edge. In general, the larger the
number, the wider the tire.
C.

65:

 Indicates the aspect ratio

which gives the tire's ratio of
height to width.

D.

R:

 Indicates a radial type tire.

E.

15:

 Indicates the wheel or rim

diameter in inches. If you change
your wheel size, you will have to
purchase new tires to match the
new wheel diameter.

F.

95:

 Indicates the tire's load

index. It is an index that relates to
how much weight a tire can carry.
You may find this information in
your owner’s manual. If not,
contact a local tire dealer.

Note:

You may not find this

information on all tires because it
is not required by federal law.

258

C-MAX (CCG) Canada/United States of America, enUSA, First Printing

Wheels and Tires

Summary of Contents for 2016 C-MAX ENERGI












































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 C-MAX ENERGI

Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
PAC GM1A-R Quick Start Manual preview
GM1A-R
Brand: PAC Pages: 4
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
STARLANE POLE STAR PRO Installation And Instruction Manual preview
POLE STAR PRO
Brand: STARLANE Pages: 24
aci ADARAC Aluminum M Series Installation Instructions Manual preview
ADARAC Aluminum M Series
Brand: aci Pages: 16

Brands by name

Popular brands

Load more brands